Help! Anyone have a T6 Chip burner ...7.3L
 

Hey all!

So here is the deal,

Rosewood Diesel is in the process of building me some Single Shot Stage II 160cc/100s. :-jammin. I just purchased a used T6 chip that is being shipped off to me tomorrow. :D

Issue: I plan to do a Live Tune and Dyno with Tyrant Diesel May 17-20 but need a tune that I can run with stage 2s and my Turbonetics from now until then. There is no point in paying a bunch of money for a reburn with all new tunes when I will only be using them for 3 weeks to a month to get me to the live tune. I would just have to pay all over again. :(

You might ask - Well why dont I just wait to install the injectors until the live tune.

And my answer is (other than there is no way I could stand having brand new injectors sitting in my house for 3 weeks), I do not want to drive all the way to Spokane with injectors in the cab with me, and risk the injector install while I'm there. Something could go wrong and keep me from hitting my live tune session that I am about to put a deposit down on. I would be out $150 deposit, plus 6 hours of freeway fuel, and a bunch of labor to reinstall my old injectors. I would not be a happy camper.


So My question is, does anybody in Washington have a burner for a T6 chip and a tune that would work for stage 2's and a Turbonetics (same size and output as a 38r) ???

And if you do, Can we work out a deal ?

Please post and feel free to call as well.

Thanks,

Bryce

425-765-3246