57-60 Hubcaps
 

Hi Guys,
can somebody post or point me to an actual photo of a correct 1957-1960 F100 Hubcap?

Thanks a bunch, Nick.

Nick I can't find a picture right now. However the correct caps from 57-60 part numbers are B7C-1130-A and the diameter is 9-5/8" With FORD imprinted.
If I come up with a picture I'll post it, unless someone beats me to it.
Good luck in your quest!

Here's a not-so-great link,but it should give you an idea what to look for.The ones for an F250 are larger diameter, as well as deeper.

Redirect Notice

Hi ibuzzard,
no link attached I'm afraid???

Best, Nick.

Here's a picture of my 58 that I don't have home yet. It seems to still have all 4.
http://img.photobucket.com/albums/v4...11/58ford2.jpg

Hey willowbilly3,
neat looking truck – patina and a half, groovy. Dare you not to put a single drop of paint on 'er?

Thanks transam525 for a nice close up too.

Best, Nick.

Sorry,It didn't work, and I'm a tech-tard.I'm on my way to work,will try again this evening,if someone hasn't posted photos by then

Steve

Photo
 

transam, I had to turn my monitor upside down so's I could read the script on the cap! :'( :)

NM, here's a link to an eBay auction for the correct caps:

1957 FORD TRUCK hubcap dog dish F100 1958 1959 1960 1961 1965 1957 1962 1964 | eBay

http://i306.photobucket.com/albums/n...0/PICT0021.jpg

This is a picture of the set of hubcaps I have for my '58.

Hey F-100CustomCabTBC, just been checking out your pics, nice looking truck!

F-100CustomCabTBC,
a nice set indeed... ebay where they?

That's my parts truck but the Yellow 60 that I'm fixing will retain it's patina.

I like the 57-60 car dog dish caps; got some on my 64 F100; they really stand out! But not oem for trucks!