Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (http://www.ford-trucks.com/forums/index.php)
-   401, 477, & 534 SD Engines (http://www.ford-trucks.com/forums/forum137/)
-   -   Engine sizes (http://www.ford-trucks.com/forums/1145992-engine-sizes.html)

Glxy66 03-08-2012 04:22 PM

Engine sizes
 
What V8 engine sizes were available in a 1964 F700/800. The engine has 5 bolts for the valve cover, but it looks a little big for a FE engine. Thanks for the help. By the way, it is gas.

85e150six4mtod 03-09-2012 11:41 PM

With 5 bolts (the SDs have 8 or more if I'm seeing them correctly) it is an FT. The intake manifold should extend under the valve covers. If so, FT for sure. I take it you know the FE motor, here is a pic of the SD motor:

Redirect Notice


330, 361 and 391 were the sizes. The 330 was a small bore (3.8something, I can't recall) with a 3.50 stroke. 361 was same as a 360, 4.05 x 3.50 and the 391 was the same as a 390--4.05 x 3.78. The 361 and 391 were also designated 359 or 389 late in their runs. These were detuned (even more detuned) smog motors.

Why Ford would designate different CID's for the same bore and stroke motors (also done with the 352 FE, a 4 x 3.50 vs. the 351C, W & M, all 4 x 3.50 motors) is anyone's guess. As a famous motorist in LA said once, "Beats me!!!!"


All times are GMT -5. The time now is 02:11 PM.

Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.