Budd 73240 8 lug tubless 17.5" wheels
 

3 Budd 73240 8 lug tubless 17.5" wheels "innie" Hub cap nubs for your original hub caps
for your F-2 or F-3 and or other? 1948-1966

May have another one but still working on digging it out of the mine in the west desert ;) it very well could just be an original widow maker but won't know till I finish chiseling it out with my trusty pick axe. :-X04

$80 each

http://i216.photobucket.com/albums/c...s/IMG_3577.jpg

http://i216.photobucket.com/albums/c...s/IMG_3579.jpg



Also have these 2 wheels same pattern as above wheels only has the hup cap clips and the center hole is approx 1/16" smaller so it won't fit over your rear axle without polishing away the approx 1/16" of material or could fit on the fronts as is.

$50 each

http://i216.photobucket.com/albums/c...s/IMG_3578.jpg

As always these are sold as is, in as found condition with the exception of the tires being removed. they appear straight and don't have any obvious damage that I could detect with my untrained eye. they have not even been washed, waxed or polished.

Buyer to verify application and or suitability of wheel to effective finished product as I have no finished product to compare to or evaluate the effectiveness of such product or placement thereon :-X18



Shipping may be possible if arrangements are made, Shipping will cost extra.

Please PM for anything I may have left out of the description, or other questions.
Thanks for looking

interested in 17.5 rims. new to this forum. not sure how to contact you.did not see private contact info.

Ya I don't think you can send pm's until after you have 25 post. You can click on my user name and see if there is an option to send email? Or just email me at. Jfmadsen at yahoo dot com.
Phone # 801-694-8826
I'm heading out the door here in five minutes. Thanks. Josh

are these still avalible and will you ship them
thanks Jon

Not sure if this qualifies as hijacking Josh's thread, but if any of you guys need a complete set of these I also have two that I'd part with. Mine have traction tires mounted that are useable, or I'd have them pulled to save on shipping costs. Stu

Yes, I believe it does. :p Thanks alot..;) Just kidding ya, post away.

These wheels are all gone (SOLD). They sold fast so if anyone needs these you better start searching now or just PM Stu for his.


I still need to follow up on the one wheel thats possibly a good one but wont know for a while. Plus I can probably access a couple more of those wheels with the hub cap clips if need be.

Sorry Josh, didn't mean to be mean! Mine are gone too. Once I got the tires pulled I found one was junk, and the other wasn't great but was worth saving. Stu

I was just teasing you. If anything I owe you for all the help with wheels questions. and how else would have I got those 22.5"s off that IHC :-X22 Next time your in town let me know and I'll pay the finders fee :-drink

later

Josh