Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1961 - 1963 F100 Unibody (https://www.ford-trucks.com/forums/forum267/)
-   -   Finally (https://www.ford-trucks.com/forums/1074808-finally.html)

turbohunter 06-13-2011 04:23 PM

Finally
 
Finally got some time to get wifeys truck put back together and runnin'.
That Y block is a beautiful sounding engine. I am in love with it. Listen to it rev in the driving vid. Whack.:-headbang
This is the second firing. In the first it fired right up and ran for a few seconds and then a fluid level check. Then adjusted the idle up a bit and then started the music.
Have to thank John Mummert for his expertise and parts.
This was my first Y block build, it won't be my last.
Notice in the rolling vid how well the new power brakes work:eek:
And I have to say, I appreciate all the guys that stay pure and don't put in power steering but holy crap is it nice.
Sorry I had to use Photobucket, but couldn't get the vids to load.



Pictures by turbohunter1 - Photobucket

unibodyslick 06-13-2011 05:34 PM

Nice job on the engine and it does sound sweet.

turbohunter 06-17-2011 06:39 PM

Took her in for paint today.
$$$$$$$$$$$$$$:-hair

turbohunter 06-23-2011 07:28 PM

My painter is asking about paint lines for the two tone paint jobs.
Especially around the tailgate.
I've got an owners manual but not to much else.
Thread search came up empty.
But I remember seeing a thread or two.
Anyone have some pics?

NumberDummy 06-27-2011 04:28 AM

inre to the paint schematic: I hadn't read this thread beforehand, so I was unaware. When we met, I could have pointed out several examples last Saturday at the Western Nats.

I have several books with factory photos, if you wish, I could loan one a them to you for ref material.

turbohunter 06-27-2011 10:06 AM

No worries Bill and thanks.
I'm out of town for the next couple of weeks so I can't drop by.
I've got a few pics scrounged up.
I'm not being real picky as to factory specs because my build is more of a "restomod".
Hate that term.
BTW it was a pleasure to meet you.
Thanks again.

turbohunter 11-12-2011 01:16 PM

3 Attachment(s)
Hi Guys
I know it's been awhile but you all know how that goes.
Finally getting close to being done with paint.
Here's a few pics to update where it is.
Over all it is so straight now it's almost not the same truck. Lots of hole repair on the bed and gate. As well as smoothing the spot welds on the side.
I did a few things that are not stock, such as following the body line on the side and rear of the cab that arcs around the corner.
Also I divided the dash into two colors. And the tailgate will be white instead of red.
There are a few line issues to deal with when you go out of the stock realm but we are working them out. An example would be the dash. How do you end the paint at the door without continuing onto the door.
The reason we didn't continue onto the door is that I'm trying not to go overboard and get into the show truck world ($$$$$). Trying to remember it will be a working truck. What we did do is paint the lower door panel red to continue the theme.
It's been a while but I think it'll be worth the wait.
Hoping to have it all set for the F-100 Western Nats.

Bill W 11-12-2011 02:04 PM

whats with all the runs?

turbohunter 11-12-2011 02:08 PM

Can you say "sand paper"
Yeah, we had a talk.

turbohunter 11-12-2011 02:41 PM

Hey Bill
If you come to the Western Nats you can check the finished job.
Hopefully over a beer.

Bill W 11-12-2011 04:02 PM

i was just kidding about runs.... it looks great! did you do a base clear?

turbohunter 11-12-2011 04:08 PM

Check the middle of the cab shot.
There is a run.
I figured being a painter you'd see it.
Single stage.
I'm a traditionalist at the core, with a few wrinkles.

Bill W 11-12-2011 04:20 PM

kind of a long sag, once the paint cures good your painter should be able to razor that down and buff it out....

the razor method is better for removing stuff like that insted of sandpaper.

turbohunter 11-12-2011 04:26 PM


Originally Posted by Bill W (Post 11029533)

the razor method is better for removing stuff like that insted of sandpaper.

That's why I'm not a painter.
Yeah, I'm sure it's gonna be pretty when done.

turbohunter 12-21-2011 05:45 PM

Update
 
1 Attachment(s)
Here's what she looked like today.
We're getting close.


All times are GMT -5. The time now is 12:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands