Parts for 300 Inline 6
 

I am in the process of pulling the original 300-I6 with 162K miles from my 86 F150. I'm going to replace it with a 408 stroker that I built. If anyone needs external parts from this thing or an intact running engine (drove it 75 miles yesterday) please let me know. email is best but will also respond to PMs.

ronbelldvm at gmail dot com

Forgot to mention, I'm just outside of Memphis, TN. In case you're interested, but wonder where it might have to ship from.

Can you post pics so I can see if you have what I need?

Im looking for the smog pump bracket from the back

I've got that bracket. Email me directly at ronbelldvm at gmail.com.

JohnFelts,
Is this what your looking for? Let me know. I pulled a complete running engine, so I am sure it is there.
Ron
https://www.ford-trucks.com/forums/p...ictureid=71689

Yes,thats it,how much?

my email is johnefelts@hotmail.com
what about the hose from smog pump in pic to?

Can you post more pics of the exhaust intake area,looking for parts from emissions and around carb

John,
I sent some pictures of that whole side of the engine to you off list. It is a lot easier than loading pictures so that I can get them in a message on the forum.

If anyone else needs something, let me know.

Ron

throttle bracket
 

hey do you have the stock throttle cable bracket? and if so can you post a piccy up of it?


thanks

Well, I disconnected the throttle cable from the carb when I pulled it, so and I don't believe I broke anything, so it is probably there. I'll get a picture of it tomorrow if you want, and try to post it, although its easier for me to email it to you directly. Let me know.

Ron

I sent an email your way.


thanks

You said this is a running engine so I don't think you would part it out but maybe you would have or know of somebody that would have six 300 piston rods for sale?
Thank you for any help finding me some.

I don't know anyone with internal parts. You might try Craigslist. Good luck to you.