Are you referring to the deflector that covers the front portion of the intake/exhaust manifolds?

I have an axle without hubs and I have rear springs.

fifty-two,

Thanks, I am attempting to work with a guy in CA (I am in southern Nevada) to get what I need. I will keep your offer in-mind and let you know.

Thanks again,

Walt

Where is the meeting Mark?

Washington Chapter FTE
 

Hey Brian, we have a meet-up once a month, usually in the Tacoma area.

https://www.ford-trucks.com/forums/1...et-thread.html

Go to the end of the thread, it will tell you where the meeting is or feel free to ask Gruesomejeans. Please, feel free to come and meet the other members!

Good evening fifty-two_f1,

I just sent an email re: inner fenders. I hope that is ok.

Best regards,
Dave

1949 wing windows with glass channels for front and bottom of side glass, ? any shape as I have to cut them for my chop, Thanks

Send me an email to jrkeesling@gmail.com. I should have what you need. I think I have original channels as well. So you need the complete wing window assemblies with glass?

yes complete assemblys but don't need glass as I will have to modify them and make new glass for the chop top Thanks Mike

looking for a steering wheel, double mount antenna, original brake lights, cab light, heater switch for non deluxe model. not sure if you have any. Thanks

Wanted: 1948-52 F1 Front leaf springs
I am helping a friend in NE PA with a project, we need a set of F1 front springs, u-bolt and u-bolt mounting plates. Anyone?

I got mine from Posies in Hummelstown, PA (POSIES Rods and Customs). Their DualFlex will give you a 2-3" drop without doing anything else. They have other options too. Suggest calling them. They were most helpful.

Pete, thanks for reply, but I should have noted that we are looking for some used springs just to get his truck to roll.

I may have what you need, if you are still looking. I'm in Buffalo NY. Drop me a message.

John

Please add a few pictures of your Magic Air emblems & decals. My '50's got the Magic Air heater. Thanks so much!