|
Hi, just joined. Looking for 51-52 front and rear fenders. Any chance you have? Thanks!
|
I have one front with lower, but no rears. Those are tough to come by! If you are interested, contact me. Thanks!
|
I'm seeking a driver's side window that rolls up in the door for a 1951 F1.
Great if the anti-rattle seals are available, too. Thank you, Doug |
Do you need just the glass? I do not have any good anti rattle seals. it is best to purchase those new.
|
I'd like to buy the glass yes. Saw the panes for 39.95 on lmc truck.
I will buy the anti rattle seals elsewhere. Are yours clean and unscratched? Thank you, Doug |
Originally Posted by DW SD
(Post 14634089)
I'm seeking a driver's side window that rolls up in the door for a 1951 F1.
Great if the anti-rattle seals are available, too. Thank you, Doug Pigeon wings $95.00 with the etched logo The process goes quicker if you call 'em direct. The $74 includes S&H, forgot to add this. Good luck, Douglas |
Originally Posted by DW SD
(Post 14635322)
I'd like to buy the glass yes. Saw the panes for 39.95 on lmc truck.
I will buy the anti rattle seals elsewhere. Are yours clean and unscratched? Thank you, Doug Honestly, If you can get a new one for 40, go that route. Original glass is never perfect and generally always has deterioration between the panes. It may not have the ford "bug" on it, but I think someone sells that etching kit. |
Originally Posted by 230thdratsab
(Post 14635809)
If you desire an original piece of glass with the Ford Safety Glass etched logo, $74.00 at Welcome to Classic Auto Supply
Pigeon wings $95.00 with the etched logo The process goes quicker if you call 'em direct. The $74 includes S&H, forgot to add this. Good luck, Douglas |
Fender's Needed
Looking for the front fender's for a 1951 F2, Any help will be appreciated.
got the old 1950 Ford F2 all done, Now onto doing a 1951 F2.. Fun Fun!! Gonna post pictures of the 1950 F2 that was restored here in a day or 2. |
I've got a set, What is your email?
|
Originally Posted by fifty-two_f1
(Post 14645801)
I've got a set, What is your email?
Sent ya a message Thanks Vince |
thanks for the info!
I think I'll just order new glass from LCM. Doug |
Not a problem, I am not familiar with LMC's glass, but make sure its the double pane instead of single. If its single, it will be thinner than the original and wont fit as snug in your anti rattle felt (but it will work just fine).
|
good tip!
Thanks, Doug |
All times are GMT -5. The time now is 07:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands