saved from neglect - 98 Exploder XLT revival
So once again I find myself with a rig in need of some serious attention. I originally bought this thinking it would make a good parts rig for my 97, but after seeing it and then actually driving it home after paying only $500 for it, I couldnt bring myself to tear it apart. It just needed some love.
Here is what Ive got so far: ____________________ this is where I found her, as I found her. She had sat for over a year, but fired right up. http://a3.sphotos.ak.fbcdn.net/hphot..._8048119_n.jpg http://a2.sphotos.ak.fbcdn.net/hphot..._1436357_n.jpg ___________________________ After I drove her home I took some close ups of what I had in store for me. severely faded headlight/signal plastics: http://a2.sphotos.ak.fbcdn.net/hphot..._6986282_n.jpg __________________ lots of moss, mildew, and lichen growth on the paint: http://a8.sphotos.ak.fbcdn.net/hphot..._4771514_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._3191131_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._5751516_n.jpg http://a8.sphotos.ak.fbcdn.net/hphot..._2494366_n.jpg ____________________ Interior smells a little, but mainly its just dirty, some mold. and some bleaching has occured on the carpet. http://a6.sphotos.ak.fbcdn.net/hphot..._1909617_n.jpg ______________ The leather is dirty, but intact and salvagable. Check out the sweet ass mobile phone! http://a1.sphotos.ak.fbcdn.net/hphot..._3298840_n.jpg ____________________ Under the hood. 303K miles and runs like champ. No major leaks, some corrosion on the aluminum parts but mainly just dirty. http://a3.sphotos.ak.fbcdn.net/hphot..._7169821_n.jpg _________________ Other issues:
|
The interior was NOT pretty...in fact it was pretty disgusting. Im thankful the seats are leather because they are fairly easy to clean and restore. The carpet is pretty bad but I thought I had a chance to bring it back
_________________ The driver seat wouldnt go all the way forward. As it turns out it was just the seatbelt slider was sticky so I managed to get the seat to move forward and got a look underneath: http://a2.sphotos.ak.fbcdn.net/hphot..._3318807_n.jpg ____________________ I shop vac a little as I go because I dont like working around moldy stuff, but once the driver seat was out this was was left to clean up: http://a3.sphotos.ak.fbcdn.net/hphot...0_441071_n.jpg ________________ close up: http://a8.sphotos.ak.fbcdn.net/hphot..._6874973_n.jpg _______________________ so I started to clean up the leather. This is a comparison of just the first step in cleaning the drivers seat, compared to the still dirty passenger seat: http://a5.sphotos.ak.fbcdn.net/hphot..._1323775_n.jpg ______________ Close up of the difference: http://a7.sphotos.ak.fbcdn.net/hphot..._2815229_n.jpg _________________ Both seats completely cleaned and ready for conditioning. http://a1.sphotos.ak.fbcdn.net/hphot..._7472181_n.jpg _______________________ Paint has been started on and this wheel has been detailed to show what they should all look like when fnished. http://a3.sphotos.ak.fbcdn.net/hphot..._7285096_n.jpg ______________ Headlights polished: http://a2.sphotos.ak.fbcdn.net/hphot..._1583305_n.jpg ___________________ my daily (97 XL) and my project side by side: http://a5.sphotos.ak.fbcdn.net/hphot...5_530631_n.jpg |
So a few days work has left me with the interior basically finished, I have a couple details left to do, like recover the armrest and clean the sunvisors but basically the hard stuff is done. I dont feel dirty sitting in it anymore and I dont feel like it will make me sick breathing inside it.
_____________________________ Here is the cargo end of it, without the extra cargo mat... http://a7.sphotos.ak.fbcdn.net/hphot..._5421610_n.jpg ___________________ ...and with the mat. The mat took the bulk of the abuse in its life, which is a good thing, but it was harder to clean. http://a7.sphotos.ak.fbcdn.net/hphot..._7078006_n.jpg ________________ back seats cleaned and protected: http://a4.sphotos.ak.fbcdn.net/hphot..._5762994_n.jpg _________________ Interior sans carpet during its cleaning process. I pull the carpet completely out and use a secret cocktail of cleaners and processes to pretty much restore it to factory clean. http://a2.sphotos.ak.fbcdn.net/hphot..._6967681_n.jpg _____________ Carpet back in after letting it fully dry near my woodstove. I did NOT dye this carpet or buy a new one. This is what came out of the truck after much cleaning. http://a8.sphotos.ak.fbcdn.net/hphot..._2788645_n.jpg ____________ Console cleaned, and reinstalled http://a7.sphotos.ak.fbcdn.net/hphot..._6919381_n.jpg _________________ remember this spot? with the moldy french fries and whatever else that was? all gone and sanitary. http://a1.sphotos.ak.fbcdn.net/hphot..._7663066_n.jpg ______________________ and the seats go back in... http://a2.sphotos.ak.fbcdn.net/hphot..._5334972_n.jpg http://a8.sphotos.ak.fbcdn.net/hphot..._1026270_n.jpg __________________ And thats pretty much it for the interior. I have a few details to sort out, but basically Ive moved on to the full on exterior detail. I will post an update once I complete the exterior. |
Wow, excellent turnaround. I respect the effort you put in to that, I know it isn't easy.
|
Lots of hard work but worth it in the end. Nice work. What time can I expect you over to help me.
https://lh3.googleusercontent.com/_F...-29-48_685.jpg https://lh5.googleusercontent.com/_F...-30-29_120.jpg :-innocent :confused: |
Originally Posted by Buzz44
(Post 10116164)
... What time can I expect you over to help me.
:-innocent :confused: |
Hey no problem Im just tring to get this up and running as a driver right now with stuff Ive had around for many years. Kind of what you did but with a little more elbow grease. This one might include a motor swap if I cant unseize the motor.
|
Looks great...You should sell whatever the concoction is that you clean the carpets with!!!
|
That's a fantastic job on that vehicle. 300,000 on an SOHC? Here I am worried about making 100k on my '98.
My '98 is IDENTICAL to this one. I just changed to those wheels in 16" from the 15" slot/hole aluminum wheels. I gotta do a little cleaning on mine, as you have shamed me into it. Of course, mine isn't near the condition you found yours in, but they do hold their looks. Congrats on a job well done. :-drink |
Yeah, i had to do some transmission and transfer case work on it, but the motor has given me no trouble at all so far. Its been very reliable for me, but Im almost positive some previous owner had it rebuilt. Its really just too nice to be 304K original.
|
Here are some other things I fixed along the way:
Also from a thread on another forum here is the meat of the trans repair. I had all forward gears working fine just no reverse whatsoever. Diagnosed as a broken reverse band: Might as well make this a diary of the process since I went ahead and dove in head first like I always do. So, it took me a little over 6 hours to get the trans out of the vehicle. Part of the problem was that everything was stuck fast and the exhaust was pretty rusty. Rather than making more work for myself down the road by having to pull manifolds and drill broken studs I took my time, used plenty of Blaster and worked all my exhaust bolts out without breaking anything. It was quite a relief actually. After that it was fairly routine but still it seemed like everything took extra effort to free up for removal. It doesnt help I dont have a lift and Im working on cold concrete with a near 50yo body, but...she came out! http://a5.sphotos.ak.fbcdn.net/hphot..._8183456_n.jpg That was yesterday, so today I cleaned up the outside of the trans. Easy off oven cleaner FTW! I then mounted it to an engine stand, an idea I got from the explorer forums and set to taking it apart: http://a2.sphotos.ak.fbcdn.net/hphot..._7173970_n.jpg I dedicated a work area and table to the job so I could keep everything in order, clean and organized. I have pretty good light in this spot as well. http://a1.sphotos.ak.fbcdn.net/hphot..._5116091_n.jpg So skip ahead to most of the day taking my time, being careful to note how everything came apart and which was was up...I came to the reason for this repair, the broken reverse band. Ive seen this exact same failure on others pictures. Seems like a weakpoint, but what do you expect at 300K miles. The tab that the reverse servo pushes on to constrict the reverse band was broken off. http://a7.sphotos.ak.fbcdn.net/hphot..._5577018_n.jpg At the end of the day, this is where I stood, transmission torn completely down, everything bagged and/or tagged and all I can do now is wait for my rebuild kit to arrive. (note the laptop for the teardown manual on hard drive for assistance as needed). Man I love technology. http://a4.sphotos.ak.fbcdn.net/hphot..._3356900_n.jpg The guts of the beast. Everything looked really good coming out. http://a6.sphotos.ak.fbcdn.net/hphot..._2166937_n.jpg The problem and the solution: http://a3.sphotos.ak.fbcdn.net/hphot..._6951720_n.jpg and fast forward to a few hours later, completely reassembled: http://a1.sphotos.ak.fbcdn.net/hphot..._1620521_n.jpg I buttoned it all back up and its been working great. Feel exactly like it should, no harsh shifts, no slips. I saved myself a TON of money doing this myself. I also ended up replacing the transfer case as it turned out the one in there had been run dry of fluid and the chain was badly stretched. During the process of finding that problem I ended up buying a replacement front carrier as well. I say buy, but it was really more of a trade screw up on the junkyards part so I ended up with it for free. Total cost of the transfer case and front carrier ended up at around $175 with fluids. All said and done I have just under $1000 into the truck including an estimated cost for the chemicals I used that I had on hand. Kelly Blue Book on it even with the miles is just over $4k, so I think it was worth the effort! ;) |
You're the man!!
|
Yes a pc is great for technology. One blue lable and two green lables for fortatude and stress relief. Some might use for moral support as well. Trans looks good. That Exploder is looking good.
|
I ain't going to lie, you do some incredible work! Those before and after shots are stunning! If you had just posted the after shots I don't think I could believe it had 300,000 miles on it.
Need an apprentice? :-X04 Sam |
All times are GMT -5. The time now is 12:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands