If you post a picture of truck front and interior I can tell you what style range ford did carry older parts through later years depending on what was ordered and over stock

https://cimg4.ibsrv.net/gimg/www.for...4936b52988.jpg
Date of manufacture 01-92
Thanks for the help. The way I have been finding parts for it is the numbers Ford wrote on the old ones.

Inside looks like an 80-86 pickup truck except the steering column.
I was wandering if the seats are the same. If no one knows I also have access to an 82 one ton and I am thinking about taking out the seat and see if they fit each other.

https://cimg3.ibsrv.net/gimg/www.for...cd00c99edf.jpg
modified trans jack used to install 3rd member
On a side note you guys might get a kick out of this'
We had to remove the 3rd member and send it out to a shop that rebuilds these and needed a way to handle it.
This is how machinists and engineers do mechanic work.
Incidentally the thing works great, me and my 13 year old son removed and installed it.

Your going to probably need a 83 to 87 interior

the floor plans are the same from 81 to 9 . Seats differ depending on trim level

Thanks that saved me a lot of work . now I know what to look for
Also our local Ford dealer has been no help at all and act annoyed when I show up wanting parts for this or any other Ford project my boss comes up with.
And they can't figure out why I won't buy a new truck from them.

69 F600 warranty code
 

I was wondering if anyone can help me with my warranty code? It is F61BKF13327

I suspect it’s had a new engine installed but figured this was a good place to start.

Thanks for taking the time

F61 = F600 (gas).

B = 300 1V I-6.

K = Kansas City MO Assembly Plant.

F13327 = 1969.

What large city do you live near? I own and operate a commercial trucking company, I I know about were u live I can givcaught a good list of places to find parts. The ford dealer will always be useless when it comes to truck 10 years old and commercial trucks.. international, rush, and sterling are good places to start

I work in Charlotte, NC and live in Cherryville, NC about 45 miles west of Charlotte.
any help would be great
thanks

check LKQ HEAVY TRUCK PARTS
1001 Carrier Dr, Charlotte, NC 28216

there also a wreker yard over in spartanburg that's pretty good. I know right were cherryvill is

1974 L9000 -Decode vin
 

Good Morning, i'm needing assistance in decoding the vin plate on a dump truck just purchased for parts etc. Any help appreciated
https://cimg8.ibsrv.net/gimg/www.for...6d542fa028.jpg
T91LVU46781- 186 G T914 IE8 8N D7P

Just above "DSO" is that "28"?

Yes sir 28

T91 = LT900 (gas).

L = 534 4V Super Duty engine.

V = Kebtucky Truck Assembly Plant.

U46781 = 1974.

186" Wheelbase,

G = Chrome Yellow.

T914 = LT900 (gas), 44800 lbs. GVWR

1E8: 1E = Medium Gray Vinyl // 8 = Standard or Custom Cab without Butterfly Hood.

8N: 8 = Dana/Spicer model 7041 4 Speed Manual Auxiliary Transmission // N = Dana/Spicer model 6352 5 Speed Direct.

D7P:

D7 = Rockwell model SQHD Forward Rear Axle // 7.80-1 // 38,000 lbs. Rear Axle Capacity.

P = Rockwell/Timken model FF-903 12,000 lbs Capacity Front Axle w/Power Steering.

44,800 lbs. Gross Vehicle Weight Rating.

28 = Louisville KY Ford District Sales Office, where the original selling dealer ordered the truck from.