1993 F150 XLT 4x4
1993 F150 XLT 4x4. 5.0L (302) V8 and AOD tranny. 168,000 miles.
Exterior: Green and gold in XLT trim. I fixed the bedsides by welding in new wheel wells, doing the body work and painting them. The bed is in excellent condition other than some rust bubbles on the bottom of the passenger side bedside near the back. Tailgate has little to no rust. Inside of bed has NO rust only scratches. The cab is in excellent condition as well. The only rust is in the corner of the door jambs. It is only surface rust. Both fenders are nice with no rust. I replaced the passenger side fender with a brand new one. The doors have little to no rust. The roof is not rusty or faded at all. All the windows are nice and clean without scratches. The truck comes with a matching fiberglass cap. The truck has 4 new 265/75/r15 tires (less than 4000 miles on them). Interior: Very nice and clean tan interior with all the options. I have cleaned it many times in the 1 1/2 years Ive owned the truck. Cloth bench seat and carpet. AC, cruise, tilt, power windows and locks, remote start and locks. TACH!!! so nice to have even with an auto. Sony Xplod CD headunit. Power lumbar seats. Mechanical: I lucked out when I bought this truck. I have had NO problems with it other than having to replace some sensors. I replaced the cap, rotor, wires and plugs when I got the truck and I have put about 10000 miles on it since. Engine does not knock, smoke, burn oil or consume any fluids for that matter. Fires up first try every time even in really cold temps. I put on full length headers and true dual exhaust that turns down under the bed on pass side. The trans shifts firm and does not slip. No problems. So heres the full scoop. I bought this truck in February of 2006. Was looking for a chevy but I found this for a good price and I love it. I drive the truck every day, but I dont put alot of miles on it (only 10,000 in 1 1/2 years). I am selling because I need a car for college. I am going to Wyotech next october and its a long drive every weekend and where I plan to live there is only street side parking and well this isnt exactly a compact car here. Lol. I have tried to take care of this truck as best as possible. I have never beaten it or gone "mudding" with it. I use the 4x4 in snow and gravel and thats it. I would really like to see it go to a good Ford guy that will take care of it. I am asking $3000 which is well under KBB. Thats all I need to get out of it to break even. I live in top region of Washington county PA half way in between the city of washington and the city of Pittsburgh. If your interested or have questions you can either PM me and I can give you my e-mail and phone number or you can just ask any questions over the PM. Visit the link in my signature titled PICS for some detailed pics of the truck. They were taken before I bought the new tires and before I replaced the fender so you can still see rust that isnt there anymore. |
1984 F150 inline
for sale:
1984 F150 300C.I. inline 6 4 Spd. OD 2wd this truck was my daily driver until i bought my diesel. i am unsure of the exact mileage but right now it is showing 80,000 recently replaced all shocks, clutch, alt., rear brake lines, rebuilt carb, i have the new motor mount. needs a parking brake cable, and a little TLC. this truck is not perfect but i dont want to scrap such a fine piece of work. inspected until the end of december. sale includes all the spare parts, etc. i have for the truck. $500 takes it all PM me with any questions or call 6104061662 and leave a message. keith |
FOR SALE:
1998 Expedition E.B. 5.4, 111K mi, recent tune up, excellent rubber, leather interior w/3rd row seat. Power windows, locks, mirrors, sunroof. Tow package, load leveling system. Runs great! I'm just trying to downsize. $7500.00 or best offer. Clean title, Located in Hanover PA, Call me 717-521-6291 Thanks, Scott |
05 F150 bumper
Still have this thing laying around. Came off a 05 FX4 with 5K. Bumper is black and has the rectangle fogs holes (I don't have the actual foglights available). I've also got the valance and all the support brackets. make me an offer!
|
seats for sell
i have a73-79 supercab blue vinyl rear bench seat in good condition $50
92-96 supercab front blue vinyl bench seat good condition $50 |
76 Hood
I have a hood from a 1976 F-250 it is in good shape. If you come get it it's yours for free.
Near Scranton Pa. Glen 05 F-350 4x4 Reg Cab PSD 6Spd. |
quad for sale
i have an 87 yamaha banshee im looking to sell.
mods include: dyno sport exhaust trinity stage IV single carb kit K&N air filter bored .60 over twist throttle any1 interested make me an offer keith |
WTB: Small Block Ford and Trans
Looking for a small block 289, 302, or 351 that runs and 2WD automatic trans. The closer and cheaper the better :) Not any real hurry and my budget will go up after I get rid of some junk.
|
the 302 went south right after i bought it. so i swapped in a new rebuilt 351w. found anouther deal i couldnt refuse so its forsale. im asking 3,000$ for it but its negotiable or partial trade. this truck would be perfect for towing. and thats what intended it for. ive only had it for 3 months or so.
1986 150 reg cab short bed new 351w (1989 block, 1998 heads (last year 302 in mustang) atx 4wd inspected till 5/08 extra leafs in rear class 3 hitch toyo 31" tires newer green paint body in decent shape there is a crack at the patch panel on the bed. and a few minor dents needs front shocks there is no carpet and a mismatched color interior, i planned on a trip to the yard. located in birdsboro, 19508 <!-- / message --><!-- sig --> |
66 Is gone
This is gone so feel free to delete my original post :)
Originally Posted by project40
Way too many projects that I don't have time to finish so my slick is up for sale. See more details in the classified ad here https://www.ford-trucks.com/classifi...t/16151/cat/17 or feel free to PM me or email me. I'm looking to get $2800 for her.
|
Hi all, I have a few things for sale in case someone is interested.
1) C6 trans with 460 bolt pattern from a 79 F250 4x2.Worked when parked.$50. 1) C6 trans with small block bolt pattern from an 89 F350 4x2.Worked when parked $50. 2) Early 460 heads.Casting number C8VE-E.They need a valve job $75. 2) Complete rear springs from an 91 F Super Duty. $50. This stuff is local pickup only.Thanks for looking. |
88-92 EB Bronco parts
freind has a 88-92 EB bronco for parts . Lots parts nice cloth seats/interior tan of course . Complete truck only missing grill
And really clear head lights. As well as good heated rear glass . If you need some thing PM me and I'll pass it on to him. |
WTB bedliner in pa
Look for and bedliner for a 6.5' bed 98' thru 04' for a F-150 styleside
email me at lgeiger13@gmail.com Thanks Larry |
302 Parts
Looking for v-belt pullies from an early 80s truck. I need a crankshaft pulley that is 4 bolts, an alternator pulley and a water pump pulley. I'm trying to convert from a serp belt to v-belts I know thats backwards :) If you have any or all of the above please contact me. Thanks!
|
Hiya folks! Jason here just stoppin by to let anyone, looking for some used 53-55 Ford truck parts, know to gimme a shout, an' see if I got it laying around. Im talking door stuff, dash stuff, heater stuff, wipers, ect....
Check out what my girl has been posting on ebay by searching for member "hotrodpostpa" We're between York and Lancaster right off of RT 30 Phone #717 684 7142 |
All times are GMT -5. The time now is 05:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands