Originally Posted by Gary Lewis (Post 12276053)

Glad it made the trip so well. Now that you know it can maybe you can do it more often?

In the rebuild did you rejet? How's it running at altitude?

We don't have a GTG thread yet. It was actually a Work To-Gather and we WTG'd until 10:00 PM. From there it was to the shower and straight to bed. Maybe today I can get some of Chris' pics posted in a thread and others can then add their own. And, although the thread will be in the only forum that is OK, we'll post a link here.

But, here's some of what we did:

• Got a pair of pallets screwed together and Chris' bed loaded on them upside-down. Then it was strapped to the pallet and loaded on the back of Dad's truck, being careful not to damage that bed in the process. }>
• Ray got the old bearings off and the new bearings on his rear axle, and the differential flushed out and checked for backlash. When he was cutting the keepers on the axles they went off like gun shots and you should have seen the guys duck. :-hair
• Bruno finished part of his project of building "posts" for the sides on his truck, to which he's going to add side boards. :-X22
• Bruno's son Kris, a new FTE member, got a new project - motorizing a bicycle. :-X04
• Jason got 95% of the welding done on my new exhaust system, with the last bit not done because we couldn't get the exhaust "Y" off due to interference between the tranny and exhaust flange/nut. I'll fix that - as soon as I rest up. :)

Originally Posted by MikeD70 (Post 12276269)

nothing ,i cant find the right wiring diagrams to wire up my solenoid and voltage regulator and its driving me insaaaaaanee !!:-arrgh

Originally Posted by MikeD70 (Post 12276325)

no ,it sux ,i have a nice 80 styleside ,302 runs great when i replaced alternator i messed up wiring ,replace solenoid ,regulator,coil,but cant figure out the pigtail wiring :-huh

Originally Posted by Gary Lewis (Post 12277250)

Here's a shot from an 81 shop manual. I'd bet the wiring is exactly the same. Zoom in on it and I think you can read it all.

Originally Posted by truckertrav (Post 12277713)

Didn't get anything done to my truck except work it.
I took it to the painter about 80 miles..on Sat.

He had a heart attack and bypass surgery Sat evening.

His wife called me and I picked it up today as he is going to be out of service for a while..At least everything went well and he is going to be ok.

I hauled my little car to have wheels back and then repeated it today..

P.S. Pic to prove it ..Drive a Ford..Haul a Chevy..

Originally Posted by Gary Lewis (Post 12277745)

I don't think your truck looks bad enough to cause a heart attack? What was it that he found? }>

Originally Posted by truckertrav (Post 12277803)

Nothing with the truck...He is about our age and I think he was trying to get TOO MANY projects done...

At least he is going to be back in business in a few months...I'm thankful that his wife got him to the emergency room in time to save his life.

On the lighter side, Ya'll got a LOT done...Trav..:)

Originally Posted by truckertrav (Post 12277962)

Great pics..Still strolling through your shop...Cool..Trav..

Originally Posted by RAY1986F150 (Post 12278048)

Id like to see some pics of that 85 XLT in your signature.