![]() |
https://cimg7.ibsrv.net/gimg/www.for...a919e09816.png
https://cimg2.ibsrv.net/gimg/www.for...6e7147c1ae.png Finally got my dash painted and back in. Wired up the head unit and speakers and put 1/2 inch jute on the ceiling. Was going to use a dynamat type product but the local upholstery guy sold me enough jute for the ceiling and doors for $20. |
Maybe i could have started a build thread.
https://cimg4.ibsrv.net/gimg/www.for...d568f39d89.jpg Got this done last night. Bed is off also. https://cimg6.ibsrv.net/gimg/www.for...274f70bc77.jpg This was my goal for last night. But a broken clutch release retaining spring stopped me untl this morning. Forgot i had a new one at home. Oh well. Needed the rest https://cimg3.ibsrv.net/gimg/www.for...2bfdad32f6.jpg Got this done this afternoon https://cimg5.ibsrv.net/gimg/www.for...4cfebbdbde.jpg Finished up the day with getting the cab on the frame. Time for a broiled ribeye and mac and cheese. |
Drove the blue one to work, admired it every time I walked out the door, fired it up and drove home.
|
Originally Posted by mfnheff
(Post 16098680)
Maybe i could have started a build thread.
|
I got everything ready to put 2 barrel intake on my Camper Special. Hopefully I can get it all put back together tomorrow
https://cimg6.ibsrv.net/gimg/www.for...def7e40bf.jpeg https://cimg7.ibsrv.net/gimg/www.for...af8ff2f8f.jpeg https://cimg9.ibsrv.net/gimg/www.for...839e2fa46.jpeg Camper Special and F-100 Flareside |
I got everything ready to put 2 barrel intake on my Camper Special. Hopefully I can get it all put back together tomorrow
https://cimg6.ibsrv.net/gimg/www.for...def7e40bf.jpeg https://cimg7.ibsrv.net/gimg/www.for...af8ff2f8f.jpeg https://cimg9.ibsrv.net/gimg/www.for...839e2fa46.jpeg Camper Special and F-100 Flareside |
Put a new gauge cluster back and circuit board on the back of my gauges. The old one had basically turned to chalk. I also got lucky enough to find a bulb on the floor of a truck at the jy to replace the one I was missing. Also got the headliner installed. Hopefully seats and console tomorrow.
|
Started a complete brake job. Even got my 17 year old in on the action. She swapped in a rear wheel cylinder and can flare brake lines like a champ.
https://cimg7.ibsrv.net/gimg/www.for...9bb54a299.jpeg |
Still trying to make it run right...
|
Originally Posted by monkey-1
(Post 16101766)
Started a complete brake job. Even got my 17 year old in on the action. She swapped in a rear wheel cylinder and can flare brake lines like a champ.
https://cimg7.ibsrv.net/gimg/www.for...9bb54a299.jpeg |
Originally Posted by axidjw
(Post 16101785)
Great job, I can't get my 16 year old daughter to do anything unles it involves cute boys, social media or her phone..lol
We also made a brake line straightener today: https://cimg8.ibsrv.net/gimg/www.for...0ba4b53e7f.png Just run the coil back and forth a few times and then rotate it and run it back and forth again. Straight as an arrow. I got to flare ONE tube today with the Mastercool brake flare kit. After I did this one, she did the rest of them. Anyone that flares brake lines (or transmission lines, or fuel lines) needs to check it out. Perfect every time. https://cimg6.ibsrv.net/gimg/www.for...7843e0622.jpeg |
Came out nice. The flare and the straightener.
|
IT LIVES!!!!!!
Yesterday went well. I paid off my pickup. Got a set of 16" rims from my brother, Dan Schildhauer, set of used tires from my friend Scott Odea and a battery from Michael Schepker. Dan, Scott and I broke 4 tires off one set of rims and mounted on the ones I needed. Dan hauled them home for me and we delivered them to the pickup. I primed the carb, showed little brother how to hot wire an old ford and we had life. We woke the old girl from a 10 year slumber. The idle was smooth, the exhaust clear. A little lifter noise but that was to be expected. It still sits in same place, no brakes or keys. Waiting for paperwork. It was a good day.
|
2 Attachment(s)
Added some bumperets, and and tinkered with the timing and the carb adjustment,,,was all messed up Attachment 139695
Attachment 139699 |
Still struggling to get the thing to run right. Almost burned it to the ground in doing so.
|
All times are GMT -5. The time now is 02:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands