Good variety here......

My new SuperCab Australia
 

Hey, after always wanting a fit ruck if finely got one. This is my f250 SuperCab ranger. Does anyone know who owned this truck before me?

Also could you recommend a good offset to run on a new set of 16x10 rims? Looking to run 35' or 37'

And lower it a bit

Thanks
Also any f250 Facebook groups in au??



[IMG]http://i212.photobucket.com/albums/c..._STR/image.jpg[/IMG]

Nice truck.

No not selling any parts off that one. I do have some misc parts laying around from a 4 door though. I'm going to be driving that Torino this summer, getting an overhaul and new 522.

Congrats on your supercab. Looks good.

"Also could you recommend a good offset to run on a new set of 16x10 rims? Looking to run 35' or 37'"

I'm running 16.5X9.75 with 4.5" backspace (-20mm offset?) 35X12.5 tires. I have about 2.75" clearance at full lock from the pitman arm. Gives the truck a nice stance IMO. If you keep some lift you should be ok with 37"

"And lower it a bit"

Lifted is great for rock crawling.... A PITA if you want to throw a bale of hay in the back.

Yeh I'm thinking -30 or -25 be perfect
What motor have you got in yours and how much lift? Yours is the only other one if seen in aus

I'm not in Aus. So you may still be the only one. Is it right hand drive, or do you think it was imported?

My truck only has a leaf added to the front. That brought the front up about 2.5 inches, enough to level out the truck and provide clearance for the 35's.

Running a 460.

https://www.ford-trucks.com/forums/p...ctureid=151745

Lookin good March, love the blue on blue

I've got a 71 Ranchero I'm redoing. I need a grill

Anyone know where to buy a indicator stalk from? can you get them as a new part or only 2nd hand?

anyhelp would be great

My new supercab
 

1979 F250 4x2 Supercab / 460 - C6
These are the sellers pictures, I still haven't personally seen it. I had my Dad pick it up for me.

https://www.ford-trucks.com/user_gal...id=258273&.jpg

https://www.ford-trucks.com/user_gal...id=258274&.jpg

https://www.ford-trucks.com/user_gal...id=258272&.jpg

https://www.ford-trucks.com/user_gal...id=258298&.jpg

Several places have the turn signal arm (dennis carpenter, lmc, etc). I've never seen a replacement shift arm.

My 75 Super Cab.

http://img.photobucket.com/albums/v3...g?t=1406934174


https://cimg7.ibsrv.net/gimg/www.for...1d71be39b2.jpg

This truck is sick.! Is this guy still around.?

18" wheels w/35's 3.5" lifthttps://cimg5.ibsrv.net/gimg/www.for...b54aa4ad71.jpg