|
Originally Posted by Scndsin
(Post 7603460)
I'll be helping a bud change out a water heater. Oh frantabulous JOY.
|
Morning out there in truck land....yesterdays swap meet was a success, I moved a couple of old mustang parts and made a dollar or two. It was nice and cool under the trees and was back at home by one.
|
Good Morning Barry, and all of the rest of you Mississippi Folks, Happy Sunday
|
Morning all. Potting gifted bananas while sorta cool.
|
Hey folks is anyone from the Misissippi Chapter thinking about going to Scrapin The Coast next weekend, I've never been to this particular event, but it lloks like it might be fun:-bigparty
|
Afternoon all, Johnny I'm not going, I've heard of the event but I've never attended.
Been to cruising the coast, have you been to that? You need to go a least once and enjoy the traffic jams. :mad: |
Originally Posted by BarryMc
(Post 7609563)
Afternoon all, Johnny I'm not going, I've heard of the event but I've never attended.
Been to cruising the coast, have you been to that? You need to go a least once and enjoy the traffic jams. :mad: |
Take some pictures and post them up, Heck we might deceide to go next year.
|
ok so i got a question for all of ya'll
i did a cam swap in my 77 w/ the 302 and the c4 got it all back together started it up relized trans line was leaking... lost maybe 2 quarts. got the line patched started the truck back up broke in the cam at bout 2k for 15 mins or so engine runs strong now. put the 3 qrts trans fluid in got about 1/2-3/4 qrt too much OPPS.got in it to go test drive and see the cam in action and my 3 speed trans will only go from 1st too 2nd and not shift into 3rd WHY? would to much trans fluid make it do this or did i fry my trans some how. shifted out fine when parked to do cam swap. |
Hello Mississippi. How have you all been doing. I am burning up in Tennessee.
|
Originally Posted by marcsmithracing
(Post 7624715)
ok so i got a question for all of ya'll
i did a cam swap in my 77 w/ the 302 and the c4 got it all back together started it up relized trans line was leaking... lost maybe 2 quarts. got the line patched started the truck back up broke in the cam at bout 2k for 15 mins or so engine runs strong now. put the 3 qrts trans fluid in got about 1/2-3/4 qrt too much OPPS.got in it to go test drive and see the cam in action and my 3 speed trans will only go from 1st too 2nd and not shift into 3rd WHY? would to much trans fluid make it do this or did i fry my trans some how. shifted out fine when parked to do cam swap. Next I would make sure the fluid is at proper operating level. If those pan out you prolly fried the tranny:-X16:-banghead |
Originally Posted by rbloodhound
(Post 7624742)
Hello Mississippi. How have you all been doing. I am burning up in Tennessee.
Mark: Try draining off some till you get the correct level. Fluid could be foamed up & not pumping right. |
i didn't pull the motor swapped the cam out with the engine still in the truck....and i'll try and get some out when i get home from work later today.
|
Let us know how it turns out.
|
Afternoon to all, been a while since I have been back on the forum been a busy summer already and haven't even got started. Changed the brakes on the SD last wknd..... Wow fun fun fun.... It was not bad except for leaving the E-Brake applied and trying to take the rear rotors off:-banghead:-banghead:-missingt This doesnt work very well.. But once I figured out what I had done it was a piece of cake. Went ahead and changed both rotors and brakes front and rear and man what a difference......:-drink Hope all are having a good and safe summer so far
|
| All times are GMT -5. The time now is 07:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands