Sounds like you are making progress Nick. Keep it up! I'm curious as well to see how this turns out.
|
Originally Posted by madMatador78
(Post 14400193)
Sounds like you are making progress Nick. Keep it up! I'm curious as well to see how this turns out.
|
Originally Posted by MOOSE_MACHINE
(Post 14400430)
I've gotta admit. The way you say that seems a little concerning
|
Originally Posted by madMatador78
(Post 14400442)
Naw man! I tell you I wouldn't have the confidence to just tear into an engine like that. Hoping you get it back up and running soon!
|
Nick, you may want to consider ordering a set of the welded piston oil jets from Riffraff. They are only about $80. With a newly rebuilt engine it would be a shame to have one fall out after you get it all back together and drop a cylinder.
|
Here is a link Welded Piston Oil Jets - Riffraff Diesel Performance
|
Originally Posted by ReBilld
(Post 14401205)
Here is a link Welded Piston Oil Jets - Riffraff Diesel Performance
|
Originally Posted by ReBilld
(Post 14401205)
Here is a link Welded Piston Oil Jets - Riffraff Diesel Performance
|
Originally Posted by ReBilld
(Post 14401205)
Here is a link Welded Piston Oil Jets - Riffraff Diesel Performance
|
Originally Posted by MOOSE_MACHINE
(Post 14401638)
Already on the list. Along with cups valves seats lifters and I forgot to ask about wrist pins. I'll do that this am. Oh and springs. It's all really easy to do now so may as well make it right, right
|
Originally Posted by farmert
(Post 14401961)
Is there an echo in here? LOL Just poken at ya.
|
Head studs?
|
Originally Posted by oldbird1965
(Post 14403116)
Head studs?
|
Originally Posted by oldbird1965
(Post 14403116)
Head studs?
|
So I went onto clays site today and probably looked like an unsupervised kid with a hundred bucks in a candy store. Anyways when I was through I called clay and he told me a few things I forgot about and a few things I didn't need cause it comes with the rebuild kit. Even after all that neither of us noticed that I didn't put valve springs on the list so I'll email him tonight.
So far on the list I've got .030 rebuild kit with machines pistons Intake and exhaust valves Lifters Wrist pin bushings Welded oil jets No limits chip w/custom tunes Still to order Hpop Stage 2's 38r turbo Exhaust Clutch At least when I get the first batch I can start to build the motor. I had planned on getting the injectors on route to rosewood today but got tied up with feed salesman and tomorrow the nutritionist is coming out. I need to get my cows milking a little better. At any rate that's where I am at. |
All times are GMT -5. The time now is 03:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands