wow, sorry i didnt reply. been off the grid doing longhaul havent been online in a very long time! anyway if its any help now...
4" springs in the front with the solid dana 44, 6" leafs in the back with no blocks (4" overall lift)
NP205 transfer case from a 78 bronco vs. the chain drive BW1356 they come with, heavy as hell but youl never break it. had to modify the tailhousing on the tranny to mount it and the tranny is no where near strong enough to support the weight so i fabbed up some bracketry for that.
the SAS was not terribly difficult with the right tools and a good understanding of suspension and geometry. i highly suggest snooping on this site, there are lots of threads dedicated entirely to the SAS that are VERY helpful.

Dude, send me an e-mail (put FTE in the subject line to get past the spam filters) with the following and I'll get you approved and post your notice on the WV boards!
Name:
e-mail address:
I presume you'll keep "wvhillbilly79" as your handle?
mailing address:
contact phone:

Once I get that, I'll approve you!

Joe Garcia
WV FTE Chapter Lead
msgt.garcia@gmail.com
PO Box 426, Hinton WV 25951
304-923-1623 cell
304-254-2335 work