Ford Truck Enthusiasts Forums - View Profile: MIKES 68 F100

Visitor Messages

Showing Visitor Messages 1 to 6 of 6

04-27-2013 09:40 AM - permalink
MIKES 68 F100

Hi
header collector ended real close to linkage .
I had to modify my shift linkage , i cut the L bracket and welded it back together shorter. also had to make a bend in exhaust at collector to go around the shift linkage . if you got the cash just get the shorty sanderson headers
04-25-2013 01:21 PM - permalink
maitai747

hi mike - i see you have flotech headers and wanted to know how tight the shift linkage is - i have a 69 f250 - thanks!
- View Conversation
04-21-2013 02:53 PM - permalink
MIKES 68 F100

390 out of a 67 tbird, stock bore , flat top pistons , 10:1 cr , balanced pistons/rods, lunati 62001 cam kit, home ported heads with stock valves, performer intake , holley 750 and flo tech headers , she runs real good . if i had t do it again only change i'd make is the cam , i'd bump it up to the lunati 62002
04-19-2013 07:50 PM - permalink
Killgore

Hey I've seen you post on some 390 builds. What are you running in your truck?
- View Conversation
11-28-2012 12:41 PM - permalink
Andy Walling

Hey there Mike, I saw in a post from last year you had a 2bbl stock carb you were perhaps willing to sell, is that still the case? I have a stock 2bbl on my 68 f250 highboy and it needs a rebuild. The only guy in town who does it wants $300... anyway if you were still looking to sell that rebuilt carb, I would be interested.
- View Conversation
04-08-2012 03:32 PM - permalink
codafisler

hello, you posted on my post that you would like to hear a fe straight piped. ill upload it for you here in a bit.
have a nice day:}
- View Conversation

About Me

About MIKES 68 F100

Location

ANTELOPE VALLEY ,CA

2 Letter State/Province (use "--" for outside USA/

CA

Country

USA

Make

Ford

Model

F-100

Year

1968

Current Mileage

25,000 - 49,999

Miles per year

Rather not say
Signature
390
10:1 C/R
Lunati 62001 cam kit
home ported heads/Flotech headers
Edelbrock performer intake /Holley 750