Hey Doc, do you still have those 3.73 diffs? I am looking for one for my 49 F1

MERRY X-MAS DOC.

Hi Doc

I did a search for Chassis Engineering IFS and found your post saying that you had installed one. We've installed one in a 51 F1 and the last thing we have to install are the front brake hoses; specifically, I'm wondering where to attach the brake hose to hard line brackets....ahead of the strut support or to the rear of it? Do you remember what length of brake hose you used?

Thanks for your time

Jeff

I'm not able to send you a PM, so to avoid putting ALL of my personal info on here, my email address is william.haley@gapac.com feel free to email me with any reservations you may have, or any info you would like/need. Thanks

Doc:
I have read some of your comments and you do know your stuff. I have 48 F1 with the 226 flathead six ( 7HA )

At Carlisle this year I bought a 49 F3 glove box lid and the lead plate was still attached to the back and is in very good shape.

I am looking for the same plate stamped for the 48 F1 and would do an even swap.

I have kept my 48 100% stock when I rebuilt it I also kept it 6 volt. Look forward to hearing from you.

Mike