Ford Truck Enthusiasts Forums - View Profile: 1bad67sbf

1bad67sbf is starting off with a positive reputation.

1bad67sbf 1bad67sbf is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 10 of 14
  1. longgone42
    03-10-2013 10:33 PM - permalink
    i got problem with f150 that you chatted in post it shut down and will not start and turn the key it pusating at the throttle.I saw a post and would love to know what the out come was to repair this truck....

  2. jjoyce11
    09-07-2011 08:34 AM - permalink
    thanks for the comment on my post. I am almost positive I am going with a 4'' suspension lift and 33 tires. Then, down the road when i need new tires i can always upgrade to 35's. my budget, as you mentioned is 3000 so this all should work out great! thanks
  3. Conanski
    05-08-2011 11:32 PM - permalink
    Here's what I came up with, the cam appears to be close to the Edelbrock 2182 and the heads are essentially the same as E7's except that they have larger combustion chambers, so compression is lower.

  4. rebsr76
    03-19-2011 12:54 AM - permalink
    Just mounted 315-70R17 Goodyear Duratracs on Pro Comp 17X9 4.75 BS will have pics soon. Had to trim a bit cause of rubbing. guess 5.5 should have been the BS
  5. kevincw
    02-02-2011 07:48 AM - permalink
    The deer was taken by my daughter the veterinarian with a bow. The electric fan conversion was done hoping to gain some extra power and mileage. I really haven't seen any increase in mileage. I make trips back and forth from NJ to Va.
  6. stevcher
    01-30-2011 06:38 PM - permalink
    thanks will i have to recall the spedo
  7. jmart798
    01-29-2011 12:24 AM - permalink
    k really appreciate it
  8. jmart798
    01-27-2011 11:32 PM - permalink
    im going to get all the brackets from a 89 f150. so yea a factory set up
  9. jmart798
    01-26-2011 11:56 PM - permalink
    hey if i do the serpentine convertion on my 351 windsor what kinda harmonic balancer do i have to use?
  10. jmart798
    01-19-2011 04:42 PM - permalink

    is this the timing cover? and if it is you said it could be used in both standard and reverse rotation right?

About Me

  • About 1bad67sbf
    northern va
    fast toys
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    100,000 - 124,999
    Miles per year
    Rather not say
  • Signature
    2007 f150 crew w/ edelbrock cat back, specter intake, edge evolution, billet emblems, 2.5 HBS level kit, vision wheels, 35in hankooks
    1967 ford mustang conv,302 with edelbrock top end and a big pile of parts
    1992 mustang 5.0 GT, lunati cam, edelbrock rpm intake, full exhaust and alot more
    2000 Harley fatboy #4 of 125 custom flame HD paint, upgraded carb, exhaust, cams, ignition and a ton of chrome


Total Posts
Visitor Messages
General Information
  • Last Activity: 06-30-2013 04:08 PM
  • Join Date: 03-08-2010
  • Referrals: 0


Showing Friends 1 to 4 of 4

All times are GMT -5. The time now is 07:38 PM.