You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
No problem. That was great of you to offer your scanguage up to Bill. I know he's been pulling his hair out this whole time trying to figure it out (even though he has no hair...hehe). I'm really no help - I'm still learning a lot myself through all this. Thanks.
Thanks for checking on me Mike. I could only find one hole in the trees to get one dishnetwork signal thru but not the other dishnetwork satellite and especially my hughes net satellite. Its a 80-100' birch tree that will have to be cut down after I leave, I told my wife I'm not coming back here without my internet, LOL. To get a cell signal I have to go down to the lake and maybe only get one bar, what a pain. Hold down the fort buddy, I'll be another week or two missing in action!! PS, I'm at a library now, good signal here, lmfao!
HI,
Hi I have a CA. 1996 F350 4x auto(unfortunately) 7.3, 4.10, SRW 210K. My mileage is bad. I would like to test ALL my sensors with and ohm meter and compare them to what new readings should be. Do you have access to what the new sensor readings should be in OHMS? Do you recommend a scan tool/programmer? I ohm'd my oil temp sensor on top of the High press. oil resevoir and it ohm'd out at 0 (faulty?). Am I safe to assume this is the oil temp sensor? On alum. oil resorvoir in front of and on top of High Pressure oil reservoir. Its not my EBPS. Truck is stock.I also ohm'd my ICP sens. (driv. side front head) with sensor in head/pig tail removed/truck cold from sitting overnight I read (30.87kohms A+B),44.3kohms C+B, (54.5kohms A+C). (C location is by itself, A and B are next to each other) If C is at 12 oclock position A is at 7 o'clock and B is at 5 o'clock. I also would like to advance my timing to get better mileage. 10.2-13.7mpg for last 80K mi. Ready to buy a Cummins again! Help!
2 Letter State/Province (use "--" for outside USA/
la
Country
usa
Make
Ford
Model
F-250
Year
1997
Current Mileage
200,000 - 249,999
Miles per year
30,000 - 34,999
Ride
97 F250 psd
Engine type and displacement
7.3L
Induction
Turbo
Tranny type
Automatic
Tires
Street Radials
Signature
Mike. 97 F250 totaled 11/19/12 B.E.S.T. mapLouisiana FTE Member Map
2012 Ram CC 1500 5.7 Hemi
Diablo sport trinity hemi fever tune, white lighting trans tunes, 87mm ported throttle body, MSD coils, EDGE 2300 TC, VB, vararam intake, BBK headers, 180* stat, Dynamax muffler, still on the floor is AR long tubes, Borla exhaust, Procharger, 15% under drive pulleys, 6.1L cam & springs. Still need steroids in a bottle
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.
Visitor Messages
Almost missed it, thanks so much for the reps Mike, greatly appreciated, Dennis
Mike Thanks for the reps! AMIGO
B.E.S.T. map Louisiana FTE Member Map
