Ford Truck Enthusiasts Forums - View Profile: Kirbys73F100

Go Back   Ford Truck Enthusiasts Forums > Members
Log In 

Kirbys73F100 is gaining momentum as a positive member of FTE.

Kirbys73F100 Kirbys73F100 is offline

Elder User

Visitor Messages

Showing Visitor Messages 1 to 10 of 18
  1. 1975MudRat
    02-23-2013 11:27 PM - permalink
    I found your truck I think. It was in a Jawga Boyz music video. Riding High -- Jawga Boyz
  2. 76_100
    03-09-2011 09:29 PM - permalink
    I picked up a 94 roller motor out of a Bronco so hopefully it will work out ok. I am going to start digging into it this weekend to see what I have. I have heard that some of the 351w "roller" motors came with roller cams and some didn't, so I am going to take it apart and check. I guess if I have mine tore apart I could think about a 408 I am running out of funds though. I have a friend I am paying to do a lot of my frame off restore/body work and paint. I wanted to do it myself but once you have kids time flies. My poor truck was sitting in my back yard for 10 years before I took it to my buddy’s place a few months ago. I’d like to do a mudder next. I have a 77 4x4 frame and driveline that I might start messing with next year but I would need the complete body, well It had one good fender lol. It was a wrecked truck I bought for some parts for my 76. Good luck with your motor build. I will check in to see how you are doing now and then.
  3. 76_100
    03-06-2011 04:26 PM - permalink
    Thanks for the info. I started the resto on my truck and have wanted these rims from the beginning. I am also going with 15x8s and I am thinking 275/60s all the way around, maybe 255/70s. I have been looking for a while for a dent with these rims and finally found yours and I think they look great on your truck.
    I see you also have a 351w in yours, how is that in your truck (I saw you also want a bigger motor in the future). I started with a 300 and am going to try a 351w with a 5 speed out of a mustang. Thanks again for the info, I will be ordering mine in a week or so...
  4. 76_100
    03-02-2011 09:24 AM - permalink
    Hello Kirby, I was looking at getting the Cragar SS rims for my 76 and was wondering how they fit? Cragar's website says "S/S wheels will not fit 1973–77 Ford pickup front hubs." What's up with that???
    Your truck looks awesome by the way!
    Thanks for any info on this...
  5. 73FordF100
    10-28-2010 04:21 PM - permalink
    I'm in Griffin. It's about 45 miles south of ATL, in case ya didn't know. lol
  6. Prozon
    10-07-2010 12:10 AM - permalink
    Yeah I saw that. I got your PM about the hydro, were you trying to send me another?
  7. ugaford
    08-12-2010 08:14 PM - permalink
    Uga all day :P Whoa bet they'll be stunning!
    ah,That's not too far from me.I'm located in newton co.
  8. ugaford
    08-11-2010 10:23 PM - permalink
    I just wanted to tell you i looked at your ford drive way in your pics and that has got to be the most perdy driveway i have ever seen=]
  9. dillinewton
    02-08-2010 10:33 AM - permalink
    hey what is your opinion on a dana 44 with chromos up front running 44s?
  10. Carlene
    01-27-2010 12:37 PM - permalink
    I tried rep'in ya for hanging in there with the Offroad guys trying to bash you but alas, I have to spread more around first.

About Me

  • About Kirbys73F100
    Lawrenceville, Ga
    Horses, Ford Trucks, Air Traffic Control
    2 Letter State/Province (use "--" for outside USA/
    Current Mileage
    Rather not say
    Miles per year
    Rather not say
    1973 F100
    Engine type and displacement
    Major modifications
    Edelbrock Intake, Edelbrock 600 cfm carb, .500 lift Comp Cam, MSD
    Tranny type
    Street Radials
  • Signature
    Travis, 1965 F100 Custom, 2wd 429 C6, 2500 stall, spool, 4.11 gear
    1973 F100 Ranger 2wd, built 351w C6, Cragars, 3.73 gear, Detroit Locker, QTP electric cut-outs
    1979 F250 Custom, 4x4 460 C6 NP205, 2.5 tons, 53's
    1979 F150 SuperCab Custom, 4x4 460 T18 NP205
    2000 Ranger XLT, 2.5l 2wd, 5 spd


Total Posts
Visitor Messages
General Information
  • Last Activity: 03-29-2015 08:52 PM
  • Join Date: 10-13-2009
  • Referrals: 2


Showing Friends 1 to 10 of 12

All times are GMT -5. The time now is 03:01 AM.


Powered by vBulletin® Version 3.8.7 AC2
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Terms of Service - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup