You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I see that your knowledge on WVO systems have caught the attention of many others as well. I am in the process of finding/purchasing a mid 90's f250 and would love to do the WVO converstion. If you could send me the information and knowledge you have on building your own system that would be a huge help. I am trying to keep this project to a reasonable cost. If I could save money on building my own set up then I would be able to save a good chunk of money. My email --- email@example.com thank you!
i saw your post about wvo conversion and how its alot cheaper to make one yourself. i have been studying wvo conversions for about 8 months and want to do one on my early 99 psd 250. i believe i know the basics, heat the wvo tank heat the filter and heat the lines especially right before going to the injectors. my big problem is im not sure where i should get each of these parts to minimize cost. also do you manage yours manually or do you use a control module to purge
Kirk, as many others, maybe you could copy and paste your info on building a WVO kit, I am ready to get my 1997 F350 a little more $$efficient. firstname.lastname@example.org thank you in advance for helping everyone out!! Brian
from my original thread I made about a WVO system: You mentioned to message you, and said you had some good suppliers and a list of parts to purchase. I would greatly appreciate ANY AND ALL help from you regarding converting my 1992 F-350. My email is email@example.com. Thank you very much!
Kirk, I'd love to see your materials list for a $200-400 WVO system. I would love to convert my truck but I'm on a real shoestring budget to do so. I know it's been a while since you offered, but if you are willing I would love to have whatever info you have. Also you mentioned using a poly tank from Tractor Supply or somewhere. Any suggestions for keeping the tank out of the bed? I don't want to diminish the hauling capacity of my truck. Anyway, if you'd prefer to email the info my address is firstname.lastname@example.org. Thanks in advance.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.