4636 patterson road, oakdale, california, 95361

551 Hood Rd
Stockbridge GA 30281

hey man thanks for posting about the 460 build up, that thing was awesome piece of info, back a couple of years ago we did a job there by montgomery, on douglass road between rte 30 and 34, nice farm and fleet there, we bought alot of tools there

Could you email me about the visor with a price and shipping details. Thanks
Lorrae90@aol.com

The core support damage can be banged out. That shouldn't be a problem. There are also 2 bolts next to the radiator, one on each side, that attach the whole front clip to the frame. You could loosen those bolts and see if you can pull the core support back towards the drivers side. This would move the whole front clip back in to position. I will probably take 2 people pushing and pulling

Good luck and keep us informed on your progress!

Mark

Poison oil, I appreciate all the good advise and information. do you think there is a chance that nothing is damaged just shifted? Like I mentioned before the core support has a small bent on the lower bottom corner were the lower bolt of the fender attatches. My dad told me that the bent could be fixed. I wish I had photos of the truck but I do not. I do not mind replacing damaged parts but since this is my first project ever I do not want to mess up and have a hard time putting everything back together not to mention spent money on parts that do not need replacement.