Thanks for the reps my friend.

Bill! My trans is doing great. Going to put a post up about it some time this weekend.

Thanks for the "Light Duty Mechanic" rep! There's no fun in keeping my comical moments all to myself.

Thanks for the reps!

Thanks for the reps. I like Webshots.com to share pics. It's free and you can load tons of them without limitations.

Thanks for the reps. The door seal tubing is the standard 3/8s inch outer diameter surgical tubing with 1/16th walls. You definitely want latex tubing. Poly is too stiff.

It was good fun!

Thanks for the reps. They are always appreciated, you will be happy with the FRx!

Thanks for the rep...I'll give you 95% it's the Fram after what you've said. Be sure the rubber gasket comes off with the old filter...when I took off the cheapo the dealer put on my van, it stayed on the engine, so I installed the 820S with 2 gaskets and proceeded to pump about 4 quarts onto my driveway.... I did this once before, in 1972, with an old Austin Healey 3000 that had a canister filter on which I did not get the O ring right

Thanks for the reps.. Glad to share with FTE. It might help out folks in the future.