Ford Truck Enthusiasts Forums - View Profile: ceetwarrior

ceetwarrior is gaining momentum as a positive member of FTE.

ceetwarrior ceetwarrior is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 10 of 13
  1. Dondre47
    04-07-2016 12:47 PM - permalink
    Hi just want to say your write up for the NV4500 swap is great and will hopefully help me a lot. I have a 79 f350 2wd with a 360FE and a np435... I just bought a nv4500 that was on a 2wd gas v8 dodge. I'll be using your write up as a guide. Just a question before I start, now that you've had the truck this long is there anything you would add to your write up that would help me lol?? Do you mind if I ask some questions?
  2. BrotherMabe
    04-06-2013 09:25 AM - permalink
    I'm still trying to name her, though...
    That is the exact same kit I used.
    So you went with 15 X 7 (front), 15 X 8 (rear) wheels.
    What about your tires?
    235/? (front)
    275/? (rear)
    Thanks, again for the info.
    Did you use the shock size recommended by DJM or did you go with something else?
  3. DeadmanF250
    11-05-2012 07:30 PM - permalink
    Hey, I noticed in a thread that you made an EGR tube out of some copper flex tube. I'm having a heck of a time getting the stocker to work with my hedman headers and was wondering if you could tell me where you found the tubing you used. Did you have to flare the ends? Etc.

  4. Bull-325
    07-06-2012 01:01 AM - permalink
    I found out that the bolt pat on the back of the bell housing on both the 390 and the 302/351 are the same and the adaptor plate bolts to the back of the bell housing. So the PN was the rite one after all. Thanks for your help sir
  5. Bull-325
    07-04-2012 04:13 PM - permalink
    ok sounds good man, thanks! ill call them tomarrow and post what i findout
  6. Bull-325
    07-04-2012 08:57 AM - permalink
    i checked out that number and it did come up with
    Dodge NV4500 to a Ford 302 / 5.0L adapter plate kit. the bell housing and stuff wouldnt be the same for the 390 and the 302 would it?
  7. Bull-325
    07-03-2012 10:49 PM - permalink
    My uncle and I are building his first truck (47 for pickup) he had a 390 in it already, and we are looking to put in a Nv4500. where did you get your adaptor? I looked at advance adapters and wasn’t able to find the correct one. Thank you for your time!
  8. rwperkinsjr
    01-17-2012 10:51 PM - permalink
    I was looking at your van video... is that in New Mexico?
  9. jg96powerstroker
    02-03-2011 12:11 AM - permalink
    dream truck hu?? lol i can make her yours!!
  10. thomer
    10-08-2010 09:29 AM - permalink
    So I see u did a 3 " shackle kit!! How did it change the ride? Did you do anything in the rear?

About Me

  • About ceetwarrior
    Just turned 30, Joined this forum in 2003, Electrician, V8 Ford car/truck enthusiast
    Working on worthy vehicles. Burning rubber. Dirt bikes
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    150,000 - 199,999
    Miles per year
    1,000 - 4,999
  • Signature
    -There's no replacement for Displacement
    My Gallery


Total Posts
Visitor Messages
General Information
  • Last Activity: 10-15-2016 09:35 AM
  • Join Date: 07-13-2003
  • Referrals: 1


Showing Friends 1 to 4 of 4

Social Profiles

Instant Messaging
Send an Instant Message to ceetwarrior Using...
This Page

All times are GMT -5. The time now is 02:29 AM.

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.