Go Back   Ford Truck Enthusiasts Forums > Members
Sign in using an external account
Register Forgot Password?


Conanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud ofConanski has much to be proud of

Conanski Conanski is offline

Post Fiend

Visitor Messages

Showing Visitor Messages 1 to 10 of 440
  1. Conanski
  2. ronnin45
    Yesterday 01:06 PM - permalink
    ronnin45
    I found on amazon Cams and lifter Kit Crane Cams 130052 Duration at 050 inch Lift:216 int./216 exh Advertised Duration:272 int./272 exh. Valve Lift with Factory Rocker Arm Ratio:0.484 int./0.484 exh.
  3. ronnin45
    Yesterday 08:06 AM - permalink
    ronnin45
    What would be the lb or pressure of the valve springs I need? I have the stock that came on GT$40 heads..
  4. ronnin45
    Yesterday 08:02 AM - permalink
    ronnin45
    OK! Do you know any cheap packege? I will try to buy from US. Amazon is the only choice I have
  5. Conanski
    01-28-2015 08:15 PM - permalink
    Conanski
    Look for a package deal, you always need new lifters with a new flat tappet cam, are you buying from the US?
  6. ronnin45
    01-28-2015 07:44 PM - permalink
    ronnin45
    Will i need new or special lifters? and what would be the best cam with 110 LSA for me with 1.7 rr??
  7. ronnin45
    01-28-2015 07:31 PM - permalink
    ronnin45
    Perfect! Thak you very very mucho. So, I will find and install a cam with max lift of 0.500" with 1.7 rockers. And no more of 220 deg intake for no problems at idle quality (1.7 rockers don't change those numbers??). And I also Will upgrade Springs, retainers and Push Rod. Right?? would yo recommend me the cheapest of that part?? thanks
  8. Conanski
    01-28-2015 05:29 PM - permalink
    Conanski
    Both of those cams will bias power towards higher RPMs and with 1.7 rockers total lift will be right at 0.500" which is good but upgraded valve springs and retainers are recommended.. the stock spring are quite weak and not good for a higher rpm motor.
  9. ronnin45
    01-28-2015 03:30 PM - permalink
    ronnin45
    Thanks!! Your help is so useful and it's better that any info that I can find in my country.. I've already buy 1.7 roller rockers because they was on a really go offer.. So, with that cam Summit 3601 or an Edelbrock 2122 and my 1.7 rockers would I have a good lift and power?? 1.7 rockers also increases 050 duration???? Remember I have gt40 (3bar) heads with stock valves but with a Really good port work.. And stock ho Headers. I can run a cam of that lift (471,.474) 1.7 rockers with stock gt40 valve Springs?
  10. Conanski
    01-27-2015 08:59 PM - permalink
    Conanski
    If you pick a cam that produces close to 0.500" lift with 1.6 rockers there is no point adding 1.7 rockers because the heads won't flow any more with the added lift so you're stressing the valvetrain for no reason.

About Me

  • About Conanski
    Location
    Ottawa, Ontario
    2 Letter State/Province (use "--" for outside USA/
    On
    Country
    Canada
    Make
    Ford
    Model
    F-150
    Year
    1990
    Current Mileage
    250,000 or more
    Miles per year
    10,000 - 14,999
  • Signature
    Paul (Conan) O'Brien

    1990 5.0HO AOD XLT X-Cab F150 3.55LS, 1994 3.0L 5-sp x-cab Ranger 3.45, 2004 3.0L 5-sp X-cab Ranger Edge 4.10, 2004 2.5L 5-spd Subaru Legacy
    1996 Kawasaki ZX11D, 2004 Honda 599, 2008 Kawasaki KLR650

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: Yesterday 10:48 PM
  • Join Date: 06-02-2006
  • Referrals: 1

Friends

Showing Friends 1 to 10 of 46

Participate In The Forums

Create new posts and participate in discussions. It's free!

Sign Up »


All times are GMT -5. The time now is 09:07 AM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup