Ford Truck Enthusiasts Forums - View Profile: bashby



bashby is a name known to allbashby is a name known to allbashby is a name known to allbashby is a name known to allbashby is a name known to allbashby is a name known to all

bashby bashby is offline

Post Fiend

Visitor Messages

Showing Visitor Messages 1 to 10 of 15
  1. Pheadrus
    01-30-2016 11:16 AM - permalink
    Pheadrus
    I'm up in Thunder Bay, Ontario and it's about 0C/32F and my fuel filter lighthas been coming on unless idling. It would flicker as I was plowing the driveway but usually sat off at idle. I have winter diesel in the tanks and added additive as well. I bought a filter and Diesel Kleen today. The truck has an electric fuel pump helping out so can I purge the system by myself? Do I have too if I get the filter mostly to the top with Kleen? Then I run it for about 30 seconds and leave it overnight or can I let it sit for a few hours and go? I don't need the truck to drive right away but the driveway does need to be plowed. Any advice and knowledge is appreciated.
    Thanks, Steve.
  2. Pheadrus
    01-30-2016 11:10 AM - permalink
    Pheadrus
    Hi
    I'm looking for some advice on a fuel filter change. You've been kind enough to help in the past so I hope you don't mind a couplke of questions.
    Thanks, Steve.
  3. Chevy_Eater
    04-11-2013 09:44 PM - permalink
    Chevy_Eater
    That's sad. I remember that signature now that you mention it. There was nothing objectionable or confrontational about it.
  4. BAshby1655
    04-03-2013 08:51 PM - permalink
    BAshby1655
    name is brad ashby. yes from Virginia. I live on the eastern shore of virginia. very awesome forum and very helpful
  5. ArdWrknTrk
    03-29-2013 03:12 PM - permalink
    ArdWrknTrk
    You said it's probably best to replace the entire 10.25 if the spindle is scored.
    But I am told I have to "share the love" before I can Rep you.
  6. ArdWrknTrk
    03-29-2013 09:33 AM - permalink
    ArdWrknTrk
    Sorry, I can't Rep you for that!
  7. BigBlockF350
    03-04-2013 05:35 PM - permalink
    BigBlockF350
    No problem man, just wanted to put you in my contacts since you helped me out and posted good info.
  8. madmiggie276
    02-05-2012 05:29 PM - permalink
    madmiggie276
    Nice truck looking to do the same on my f250 can you give some details about the motor
  9. ArdWrknTrk
    01-24-2012 10:40 AM - permalink
    ArdWrknTrk
    Thank you for the Rep's!
    Sometimes it's challenging to get your point across.
  10. ColdForge
    03-14-2011 07:04 PM - permalink
    ColdForge
    hello i was looking at teh upgraded headlight relays I cant find the relay. you said LMC makes it. What does LMC stand for? is there a website? thanks


    john

About Me

  • About bashby
    Location
    Charles Town, W bygod Va
    2 Letter State/Province (use "--" for outside USA/
    WV
    Make
    Ford
    Model
    F-350
    Year
    1986
    Current Mileage
    100,000 - 124,999
    Miles per year
    1,000 - 4,999
  • Signature
    92 F250 4x4 7.3idi zf5 3.55's Meyer plow
    86 F350 2wd C&C Dump 351w C6 4.10s Meyer plow... lawn ornament
    The rest of my signature changed as to not offend some liberal crybaby.

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 10-12-2016 03:36 PM
  • Join Date: 11-15-2005
  • Referrals: 0

All times are GMT -5. The time now is 09:04 AM.