Conversation Between Ford_Six and mhar6080
Showing Visitor Messages 1 to 2 of 2
-
Pretty basic, just move the perches to the next set of holes forward and get a transmission with the truck small block bellhousing (164tooth flywheel, the 157 tooth was for cars and puts the starter in a slightly different spot for the smaller flywheel).
You will also need either a custom lower radiator hose or a six cylinder radiator, I made a hose by cutting the old one and adding a section of pipe between the two pieces. Other than that, very straightforward.
You may want to post in the 67-72 forum, though, in case I missed anything.
-
Howdy, new member here. You a 6 cyl. guy? I'd like to talk with a guy knowledgeable about those, i.e. switching out 360 v/8 for the 300cu. in a 71 f100. you know something about that?