Conversation Between xmontex4 and duallyboy24

No worries man, I ended taking two pieces of steel and extending the lower mounts to make my old (2004) column fit. My automatic shifter hits the dash and my fix was to install an 07-16 expedition console and use the automatic floor shifter that mounts with it. If it wasn't for the cold weather here i probably would have finished it by now but i dont want to break any plastic. I had to carve the dash out a little under the panel to get my fuse block to fit more off to the left so the ignition could be plugged it. I should be updating my thread this weekend with my progress on it so there will be pictures.

hey bud I had a quick question. I putting an 08 dash into an 05 f250. I was able to mount everything now the only problem is the steering column. I have it bolted up where it turns the wheel and all I just cant figure out a way for the ignition to be connected to it and for the automatic shifter to be plugged up to it. I would appreciate the help. Thank you