Conversation Between reverendxlt and 79F150rebel

im sorry to say this but i found the bracket from when my old man pulled the engine.. i have it siitin in the truck just got the motor bolted in today.. i really do appreciate your effort to help me out, tho man. thanks alot

my towers are gonna work just had to do some fabrication but id still like to buy that bracket if we can work that out

oh, do you remember my any chance what the distance from the center hole on the towers to the face of the bellhousing was? my bellhousing is on the tranny now and ive taken measurements the towers i have would work but they need to come back exactly 1 3/4" for the motor mounts to sit properly.. should i try and use them or what? im lost here its my first swap..

ok, the grime is fine. haha, so whats the difference from the 300ci towers and the towers you have? and money order is fine with me Gimme a call to get your address and ill give ya mine as well. 8149772185

The bushing for mine is still good so thats fine. as long as they are not rusted out they will work i can blast and paint them accordingly.. my zip is 15522, bedford, PA. $75 sounds pretty good to me for both items when can we do this? and do you want a money order or a check if we do?

How much would you want for the towers and the bracket, if you have the bushing bracket? I could probly fab my towers to make it work but i dont really want to have to weld them onto the frame.. so, if you have the correct towers, im interested. Write when you have a chance, thanks for the help,
Tyler