Conversation Between subford and FourXFord2

The light blue wire with a yellow stripe goes to two different places depending on if you have a E4OD or not.
The images are from the Ford 1990 F-Series E&V & TS Manual.
The 1991 wiring should be the same.

Here is where it goes if you have the E4OD:


/

Connector locations:


/

NCA = No Color Assigned.

It's me again! I have been studying the diagrahms you e-mailed me and have a couple questions. Where is c106,c114. I don't know the year of the harness I used but I'm sure it was from a '90 F250 / 5.8L. I may have to add a wire or 2 to vehicle side of the harness. Also puzzling me is a red/ broken lt blue stripe. Starting system? and what the heck does haynes diagrams mean by NCA? I posted 2 pics on What have you done to your bronco today thread.

Ok, still need help with 6 wires.
ckt347- pin 10
ckt 57- pin 9
ckt648-pin 16
ckt883-pin 20
ckt570-pin 30
ckt398-pin 36
In the '91 harness there are 3 black/yellow wires, and 2 grey/white wires. Tnx for the other pic, it helped some.