PDA

View Full Version : 2.6, 2.8, 2.9, 4.0 and SOHC 4.0 V6

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [48] 49 50 51 52 53 54
  1. 2.8L Rebuild
  2. 97 exploder, 4.0, stall on startup
  3. part number for Motorcraft double platinum plugs?
  4. How can i tell if i have a sohc or ohv?
  5. Why is the Explorer more powerful??
  6. need expert advise on ranger w/2.9
  7. 97 Explorer 4.0 Will Not Start
  8. 92 4.0l
  9. 2000 Explorer 4.0 SOHC hard to start and fuel tank issues
  10. Engine sputters after warm up
  11. Locating EEC Relay
  12. 2.9 oil pressure...help!
  13. 4.0L SOHC pinging/octane shorting switch
  14. Does anyone have an aftermarket (flows, etc) exhaust on their 4.0 SOHC?
  15. 4.0 SOHC timing chain rattle...
  16. cold air intake
  17. 91 Explorer 4.0L OHV Altitude Sensor
  18. Knocking Ranger
  19. oil and temp guages are running high
  20. backfire through intake, little acceleration
  21. 4.0L SOHC engine knock on start up
  22. Vacuum on oil filler cap
  23. cleaning under valve covers?
  24. 4.0 l lopes at idle when warm
  25. 2.9 No Power
  26. PCV Valve in 4.0L SOHC
  27. 2.3 liter
  28. Sounds like i own a diesel
  29. Is BII' 2,9V6 same that Scorpio 2,9V6
  30. after market parts for an 86 2.9 L