PDA

View Full Version : 335 Series- 5.8/351M, 6.6/400, 351 Cleveland

  1. 400 Stroker-434 Final Day
  2. same or different?
  3. How do I find out where it was cast.
  4. 4 Groove or Single Groove Valves
  5. father/son asking for real help
  6. A.I.R. Pump trouble
  7. length of intake valves
  8. 351m motor mounts
  9. Cowboy's 400
  10. 351C with dead cylinder, help needed.
  11. hp question?
  12. Roller Rocker Ped. mount?
  13. stock 351M?
  14. 400/mustang
  15. engine clatter and missing help
  16. bad starters
  17. Timing degee change
  18. New Initial Timing
  19. stock 460 carb on a stock 351M?
  20. MSD ready to run dizzy instalation??
  21. flooded 400
  22. what to build a 1978-400 or a 1972-429?
  23. Difference between 351M and 351W intake
  24. Replacing 351C valve stem seals in car.
  25. 351M bogging under load
  26. Almost there, additional items to run a hv oil pump
  27. 351M cranks, all drilled for manual tranny?
  28. spiting gas/oil
  29. 351c pistons and 351m-400
  30. Dish depth in stock 400 pistons