PDA

View Full Version : 3.8 & 4.2L V6

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [32] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
  1. intake manifold diffrences
  2. 5W-20 substitute
  3. error codes p1132 and p1131 THANKS
  4. Hydrolock
  5. 2002 4.2 pcv location...not on valve cover??
  6. 2001 4.2 coolant leak
  7. 3.8 Pushrod install question
  8. Fyi
  9. vacuum gauge
  10. 2004 4.2L P2195 P2197 codes
  11. 98 Mustang 3.8
  12. Baffled Beyond Belief
  13. 4.2L rod big end size?
  14. Oil Burning
  15. Are freeze plugs re-usable?
  16. P0133 code
  17. 3.8 CEL keeps coming on
  18. Test Points
  19. 3.8 identify this part
  20. vibration at 47 mph+
  21. 3.8L Hiccups
  22. 3.8 wont start warm
  23. Some advise for a 4.2????
  24. oil problem 4.2
  25. Door Rattle
  26. 3.8 intake gasket replacement
  27. '93 3.8l oil filter?????
  28. 4.2 sudden problems
  29. Will a 2001 4.2 bolt in place of 98 4.2?
  30. 3.8 nightmare