When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My "parking aid" or backup sensor is not working on my 2003 Excursion. This has kept me from hitting stuff in the past, so I'd like to fix it. Dealership said that the right outer sensor is inoperable. Would like to fix it myself. Any tips on where this sensor is, where to purchase one (Napa or only at the dealerhship?), and how to remove and replace?
Contact parts guy Ed. Disconnect the wire harness, pop out the old, replace with the new, add dielectric grease or Fluid Film, reconnect harness and your are backing again. even with kin-folk discount, about $80 plus shipping.
Contact parts guy Ed. Disconnect the wire harness, pop out the old, replace with the new, add dielectric grease or Fluid Film, reconnect harness and your are backing again. even with kin-folk discount, about $80 plus shipping.
Good info. Who is "parts guy Ed"? Is he a member of the forum?