When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've got a 550lbs Impact Wrench that did nothing... I've got a breaker bar with a 3/4" driver and a 4' extension that I could stand on (I'm not that heavy though), but nothing moved.
P.S. - I'm well aware of the reverse threads and not making that kind of oversight.
I've got a 550lbs Impact Wrench that did nothing... I've got a breaker bar with a 3/4" driver and a 4' extension that I could stand on (I'm not that heavy though), but nothing moved.
P.S. - I'm well aware of the reverse threads and not making that kind of oversight.
Recommended torque for F4 through F8 is 400-500 foot-pounds.
According to the manual a 150 lb man putting all his weight on the end of a 3 foot wrench equals 450 ftlbs.
So when I put all my weight on the end of my 4' pipe, I am torquing them at 1080 ftlbs. opps!
09-19-2010, 09:02 PM
