Great movie! Wish we would treat our vets better when they return. They are true heros.

 

All I seem to do is make up things with zerks in them. lol

 

where do i get one of them zerk thingys

 

Holy crap, that's cool!

 

Drove the Ex today, I really gotta back flush the heater core and replace the antifreeze. this thing ain't putting out the heat it needs to at 0F.

 

Changed the PCV valve. Woot me.

 

Ok bud, what application would that be used for?

Stewart

 

would that be an updated zerk for the hubs through the antiskid sensor?

 

These are for those track thingies people put on their 4 wheelers and side by sides. They are the bolts that hold the shafts that hold the boggy and cog wheels. Then obviously when you grease the zerk the grease flows into the shaft and to the bearings of the boggies and cogs. The zerk is recessed so when trashing threw the mud and woods a stray branch or rock won't shear off the zerk.

They make similar bolts with zerks in them for tandem axle trailers for the spring bushings and the like.

On my trailers I drill out the hubs between the two bearings and install zerks so I can grease the bearings (from the middle pushing the dirt out without removing anything or getting dirty. Bearing buddy caps push the dirt that the bearing pushed out back into and threw both bearings.

Everything should have a zerk!

 

Huh?

Got pics?

Stewart

 

Silly Southerners




My next door neighbor has a set for his 1990s jeep. They are not cheap!

 

so much for jumping it

 

Those tracks are VERY expensive

There is a company that makes them for RC trucks too, tiny little tracks

RC4WD Predator Tracks (Pair)

 

Thought I would show it on an Excursion....

 

your posting the wrong pics, i wanna see the leaker! get under it and take some pics, we know it leaks already!