'03 F-350 SB Bed Pan

Reply Subscribe

Thread Tools

Search this Thread

06-07-2010, 01:22 PM

decker64

New User

Thread Starter

Join Date: Feb 2010

Location: Commerce City, CO

Posts: 8

Likes: 0

Received 0 Likes on 0 Posts

'03 F-350 SB Bed Pan

I did some searching on this but have not found anything specific enough for what I'm doing. I just spent $3K on exterior body work on my truck. The plan then was to pull the drop in liner and put in a Line-X spray in liner. Well, when we pulled the drop in liner last weekend the bed pan and wheel wells were pretty beat up. Looking at it in hindsight I should have done this before hand and just put a new bed on. Now that the money has been spent, I am looking into replacing the bed pan and getting the dents in the wheel wells pounded out. A new bed pan is about $500 but the majority of the cost will be installing it. I am wondering if anyone in town knows of good steel fab shop that could maybe cut out the old upper panel and weld in a new one. I also read where someone replaced the pan in an older truck with diamond plate. That could be appealing as well. Thanks for any help.

Reply Like

07-17-2010, 12:12 PM

ceetwarrior

Cargo Master

Join Date: Jul 2003

Location: Colorado

Posts: 2,305

Likes: 1

Received 2 Likes on 2 Posts

I think diamond plate floor would be killer.

I hate running into projects like that, where you should have replaced it, but put to much work into the outside or vise versa. I've done that so many times...

Reply Like