Hey guys, been a little while since I've been here. Finally got my truck back from the exhaust shop having the manifolds installed. He wasn't able to save the 02 sensors so I told him I would take care of it. So now for the odd question.... I have the sensors and i have them in the manifolds but I cant seem to find the plug for the drivers side 02 sensor. Would anyone mind tracing theirs and letting me know where it ends up?
Thanks in advance for any and all help.
~Andy

 

You'll have to help us with the year, model, and engine to say for sure, but most trucks in this model range (87-96) only have a single O2 sensor.

 

Sorry about that guys, thought I had my sig filled out. Its a 96 F150 302 auto 4x4. It has one on either manifold and then one at the cat. Its the location of the wire I need on the passenger side.

 

All I have seen are in area where D&P side pipes join near bell housing on pass side .

 

Yes, the '96 has three O2 sensors. I'm not that familiar with those, so I can't be much help in tracing the wires. I thought I'd save you some aggravation if it was an older truck with the single sensor. Hopefully someone else will give you a hand.

 

Thanks for the replies. It does have the 3 sensors. I still can't find it though. Would it possibly hook into the same plug with a y connector?