alternator harness question and switching to 3G alternator
#1
alternator harness question and switching to 3G alternator
Hey guys. i'm looking at switching to a 3G alternator, but i had a couple questions first. to start off my harness is a '92 5.0 harness. the alternator harness on it seems to have failed at some point and the previous owner cut and spliced 2 new wires into the alt. harness where it attaches to the starter solenoid. Shouldn't this have a fusable link on it???
If i switch to a 3G will the 2 wires that attach to the starter solenoid be replaced with the 3G harness??? Does anyone have pics of their alternator harness where it attaches to the solenoid? i will be switching to the 3G, but i'm just not completely sure what all i'm going to be changing out when i do it. it looks like i'm just going to be replacing the plugs to the alternator and where it plugs into that one plug in the middle of the alternator harness. So that would still leave me needing to figure out what to do with the starter solenoid side of the alt. harness. any help is appreciated!!!
If i switch to a 3G will the 2 wires that attach to the starter solenoid be replaced with the 3G harness??? Does anyone have pics of their alternator harness where it attaches to the solenoid? i will be switching to the 3G, but i'm just not completely sure what all i'm going to be changing out when i do it. it looks like i'm just going to be replacing the plugs to the alternator and where it plugs into that one plug in the middle of the alternator harness. So that would still leave me needing to figure out what to do with the starter solenoid side of the alt. harness. any help is appreciated!!!
#3
Try this website:
95A 3G Alternator for 87-93 Fox Body Mustangs.
And take a look at this webpage:
http://www.paperformance.com/scripts...p?idproduct=73
I did this PA conversion on my 92 about five years ago. Good alternator output and it was an easy install. And PA has good customer service and support.
95A 3G Alternator for 87-93 Fox Body Mustangs.
And take a look at this webpage:
http://www.paperformance.com/scripts...p?idproduct=73
I did this PA conversion on my 92 about five years ago. Good alternator output and it was an easy install. And PA has good customer service and support.
Thread
Thread Starter
Forum
Replies
Last Post
borffmann
1987 - 1996 F150 & Larger F-Series Trucks
8
12-01-2019 04:57 PM
borffmann
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
1
02-11-2014 06:20 PM
sdetweil
1948 - 1956 F1, F100 & Larger F-Series Trucks
6
06-13-2008 09:10 PM