Does anyone know of a replacement for the boots. Mine deteriorated and one split. I have it rigged now, but I am not thrilled. Thanks Ben

 

What tube are you talking about? The one for the intake? You can get them from any big truck shop...

 

yes the intake. I had an AFE with the torque tube. I have long done away with the AFE and the oiled filters and now I use the NAPA 6367(?) with the torque tubes. Anyway, the rubber boots are shot.

 

Clay at Riffraff has a nice set of boots..(if you're talking about the IC boots, they are way heavier and thicker than the stock ones and fit tight !

 

my AFE stage 2 takes a 4" boot..i used this one
Silicone Couplers

 

You just need a 4 to 4 boot... Clay will have something or your local truck shop will have it if you need it asap.

 

Call AFE they have Great customer service
I have had no issues getting replacement parts under warranty
Do you have your original proof of purchase, I just had to prove I bought it at an authorized shop. They have sent me the exact boot you need, mine turned to shreds after a few years and they sent me a new filter element-FREE!!!

 

Thanks for the replies. I decided to go with the blue silicone from the web link Ron supplied. $10 plus shipping didn't seem to bad. I am half embarrassed to say that I did try a fernco fitting from Home Depot. All I can say is don't waste your time.