When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed both upper and lower radiator hoses, filled the radiator and was about to fire her up when I realized I should have removed it to paint it with por. Do I re drain it in the name of obsessive compulsive disorder?
installed an aftermarket tach in my 77 f250, and repaired the 2nd of 3 horibble gas leaks, fixing the 3rd tomorrow, its supposed to be warm in the 30's haha
Are you sure it's a good idea to paint a radiator with POR? The stuff I used was kind of thick. I'd hate for paint build-up to mess with the cooling.
Not sure you need that kind of rust preventative on the exterior of a radiator, either.
I'm interested in hearing other takes on this.
JW
I just mean painting the top and sides, not the cooling faces. POR is probably gross overkill. But spraying it with semi-gloss black would clean up the engine bay a bit.
Tired of the stock ones with plastic tops that crack and small threaded rod that is held on to the shytty thin tray!
I used 1/2" bolts with 3/16 angle tabs and 1/8 plate for box..
I got ALL the electrical issues resolved! I can now turn on the lights and turn signals without blowing fuses. The hazard flasher is kinda weak so I'll be replacing that along with the headlight relay mod on Monday. Was thinking about modding marker lights/turn signals and brake lights to LED... Anyone done this yet??
Got my new wheels and tires on, got both inner fenders,pass. side door and fender on and lined up. Found out that the paint on the doors and fenders does not match the rest of the truck so looks like the painter gets to do some repainting.
finally got the heads put on my 466 im building, then sandblasted the valve covers and painted them. The intake should be here on tuesday so thats next
I got ALL the electrical issues resolved! I can now turn on the lights and turn signals without blowing fuses. The hazard flasher is kinda weak so I'll be replacing that along with the headlight relay mod on Monday. Was thinking about modding marker lights/turn signals and brake lights to LED... Anyone done this yet??
if you do LEDs, you will need resistors. because they are so efficient, it causes your turn signals to blink very rapidly, the way they would to indicate that you have a light out.
i know this is off topic but do any of yall have a short wheelbase truck bed for a 73-79 F-150? I need one for my truck and it cant have a lot of rust. i put up a thread lookin for one. I think the guy I was gonna buy one off of might have sold his.