You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Are there any welders here from the Pittsburgh area... Not looking for a freebie or even a discount... just would rather give a fellow Ford guy the business. I only need a muffler and some stainless pipe welded after i make my selection (still hammering out what Im going to do... V10 makes it complicated). I will need some rod stock to make some hangers out of to utilize the stock hanger locations also. I will also be putting Flowmaster's on the 'lil woman's Lincoln LS, so its two jobs. Ill bring a jack/stands or some ramps for the Lincoln if you dont have a lift.
Man I can do it just don't have the time. There is this plcae in clay pa called red run exhaust (I think) and they do great exhaust work. They are cheap too. I'll look in my father truck for there bussiness card tonight!
__________________ Doug BSer #14 NJ member! Come on winter!! 96 F250XL Psd 4x4 160,000, Jasper trans, afe intake, 3" DP, Isspro gauges, D60 swap! Next Chip, Bts Trany, Stage 1's 00 F250xlt,psd, 2wd, 3:73, 380,000 , K&N intake, super chip, auto! (Dad's) 97 F super duty Dump truck 7.3L 5sp (Newest)
that would be great... Im not sure where clay is in relation to where I am... but Ill see if I can look it up. Im not doing this tomorrow or anything, this is more like a "before summer" project. So if I have to wait for someone to have time its no big deal.
that would be great... Im not sure where clay is in relation to where I am... but Ill see if I can look it up. Im not doing this tomorrow or anything, this is more like a "before summer" project. So if I have to wait for someone to have time its no big deal.
It in lancaster. I couldn't find there bussiness card but going to try looking them up.
__________________ Doug BSer #14 NJ member! Come on winter!! 96 F250XL Psd 4x4 160,000, Jasper trans, afe intake, 3" DP, Isspro gauges, D60 swap! Next Chip, Bts Trany, Stage 1's 00 F250xlt,psd, 2wd, 3:73, 380,000 , K&N intake, super chip, auto! (Dad's) 97 F super duty Dump truck 7.3L 5sp (Newest)
Thanks doug, they are a little far if they're in Lancaster. Im in Baltimore a lot for work so its possible that I may swing up Rt30 and check them out.
Team Hard I don't have facilities outside of the workplace but I can hook you up with guys who do. Got an old pal in Penn Hills that is a master fabricator and a die hard mud racer. Oh and he's been driving Ford trucks all of the 30 odd years we've been friends. Have another friend in Fawn Township who can handle it also. He's mostly a Chevy guy he's got a couple of Ford tow trucks. Both guys have lifts.
Hey Redcat, say hello to the Mud Missile for me? Have you guy's had any more meets at PGH Mills?
Haven't had any meets. I think when the economy tanked it put a lot of guy's projects on hold or they sold stuff just to pay bills. I got hit pretty hard but not as bad as some. Things are better for me at least and I hope others are doing okay. Next time I talk to Chuck I'll tell him you said hi. He's busy with the Missile and building boat engines.
Glad to here you are doing fine, all is well for us down here in Fl. Do you still here from any of the other local guy's up there? have any of you guy's made it out to Carlise for the big meet, I see they are now on the 3rd annual meet.
Glad to here you are doing fine, all is well for us down here in Fl. Do you still here from any of the other local guy's up there? have any of you guy's made it out to Carlise for the big meet, I see they are now on the 3rd annual meet.
Haven't heard from anyone in awhile but I'm not on as much either. I'm working 2 jobs these days so free time is scarce. I'm gonna try to make Carlisle this year. I'm hoping to take my 72 to a show in Uniontown this coming weekend if the weather cooperates.
Haven't heard from anyone in awhile but I'm not on as much either. I'm working 2 jobs these days so free time is scarce. I'm gonna try to make Carlisle this year. I'm hoping to take my 72 to a show in Uniontown this coming weekend if the weather cooperates.
Sorry to here you have to work two jobs and are being deprived of your FORD time, that should be illegal! I think you should get a bail out, so you can enjoy your truck more!
Hey Clay - any chance any of those guys do welding for body sheetmetal at all, or are they strictly doing framework and heavier duty stuff? I have rust issues that I need addressed on the Explorer that require welding (I have the panels) and maybe I could fanangle something to happen since I'm out here in C-berry for now.
__________________
Bill - PA Chapter Member
'98 F150 "Brahma Bull Edition" 6" BDS lift, 33x12.5's, 17x8 Eagle Alloys, Bushwacker Flares, K&N CAI, Pioneer head unit, Rockford Fosgate amps, Infinity Speakers, MTX 8" Subs, custom badging, Cherry Bomb Extreme exhaust
'98 Expedition Eddie Bauer- "Bull Support Vehicle"
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
"Army Vet. and American for Life"
