86 f-150 slave cylinder bracket?
#1
86 f-150 slave cylinder bracket?
Does anyone have a picture or have access to take a picture of 86 or similar clutch slave cylinder bracket? I'm putting in a 86 351 into my 90 Jeep Comanche. The bellhousing didn't come with the bracket. If anyone has a bracket laying around i will gladly take it off your hands.
Thanks
Thanks
#2
Here's a picture.
AutoZone.com Repair Guide Image
On my diesel, the bracket was cast into the bellhousing. The slave just slipped on the casting.
You can see the "U" shaped casting in this picture on the driver's side of the bellhousing.
http://www.autozone.com/autozone/rep...ave%20cylinder
AutoZone.com Repair Guide Image
On my diesel, the bracket was cast into the bellhousing. The slave just slipped on the casting.
You can see the "U" shaped casting in this picture on the driver's side of the bellhousing.
http://www.autozone.com/autozone/rep...ave%20cylinder
Thread
Thread Starter
Forum
Replies
Last Post
phantomjt3
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
10
06-26-2016 09:44 AM
dconrads
1987 - 1996 F150 & Larger F-Series Trucks
3
01-08-2015 09:32 PM
cliffordingles
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
38
08-30-2014 03:55 AM
Ibuildembig
1987 - 1996 F150 & Larger F-Series Trucks
1
07-23-2012 12:59 PM
artfd
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
04-10-2009 12:29 PM