IMO, it is worth it if you get one cheap, but I wouldn't pay more than about $150 for it though.
Agreed, but he already has it also. He's got plenty of toys coming for his beast... yes, beast. 6" lift with 37" tires on 20" rims... and that front bumper... WOW.
Anyway, I think the concensus is that it's not "bolted in" per se, but held in place with the top cap & the boots. Have you taken off the hood latch? I do remember now, that needs to come off. Good luck brother!
__________________ Brendan
1999 F250 CC SB 4x4 7.3 PSD named "Nyx"
BTS VB;6637;A-pillar (pyro, boost, trans temp);XM radio;Alpine CDA-9831 w/RCA inputs;Leveling kit;Adrenaline HPOP;UnderCover tonneau cover;05 headlights
Agreed, but he already has it also. He's got plenty of toys coming for his beast... yes, beast. 6" lift with 37" tires on 20" rims... and that front bumper... WOW.
Anyway, I think the concensus is that it's not "bolted in" per se, but held in place with the top cap & the boots. Have you taken off the hood latch? I do remember now, that needs to come off. Good luck brother!
thanks 4 the props and your truck is also very nice . well its in now & now its time to do what i do best .MODIFY
The 6.0 intercooler is a great mod, especially when a Sponser gives you one for free out of the goodness of his heart!
__________________ Jeff
01' CC PSD LARIAT 4X4 6" Spring Superlift, 37's
Proud Member Of The Brotherhood
WW,RRP AIH delete,RRP HRX, DPTuner, ISSPRO EV2's, TCT Tranny, HH mods, DFA RR and CCK, CCV, Tymar w Pete's Cover, DB 200A, 6.0 Intercooler, AD in #8, 5" Cannon, RedHead SG,
Well its in . I would take a minute and thank everyone who helped . I get a warm and fuzzy about a group of people from around the U.S. with one goal in mind - to help each other .
RRW is Riffraff west. It is the weekend of July 31st I believe. It takes place in Tennessee.
It's a big get together for alot of us guys. Clay holds it and he has a ton of good give aways... (Sticks, Shelby GT500 limited edition painting, gift cards, DP Tuner, etc)
Just out of curiosity why are headers on your list?
Not alot of guys get them till big $$$ engine builds
__________________
*Andrew*(and bff Owlie)
2002 F-350 CCLB 7.3 255,000 Miles *** 5" Cannon, 6637, DB's HT Starter, Pete's Cover, EV2's, Zoodad, 6.0IC/TC, CCV Mod, BTS VB, Van Turbo/WW, Casserly 160cc SS, RDP HPX, DP Tuner, 2.5" Lvling Kit, 05 Harley Grill, Ceramic IH Uppipes, In-Tank mods*** Next-Homemade RR, Water Inj. Destroyed by Ford Mechanics, Resurrected By FTE and Riffraff Performance
I'm sorry for not reasearching first, but the 6liter ic does not bolt in??
It did lok like the upper mounting tabs were different but the lower saddle mount looked the same. I know I'll need new ic couplers (I'll get my brother to buy all 6 new for his truck) but how does the ic mount in there. Any pics of the install I can ok at.
I'm just trying to get the info so I can get the 6liter ic into his truck quickly without his wife knowing, lol. Then I get his old one so I can modify it for my truck.
__________________
JR Strout...aim UNTAMND...2000 F350 4door-LB 4x4 DIESEL auto, SS HPX, 4" exh, WW, underdash gauges, BLUE dash illumination, AIH Delete, CCV to the rear, FORD apcm Idle controller, airaid dropin w/modified airbox...LOTS and LOTS of tools in the back__Lots of parts not yet installed Coolant filter 6liter transcooler external trans filter sonnex/springs
67 Mustang GTA Fastback 390dual-quad c6...not stock www.UNTAMND.com
91 Geo Metro TURBO 3cyl, large fmic, large turbo, tiny tires...and Yes, its fast!
I know RRE is planned (as posted above) but has a date (or the event?) for RRW been confirmed? I didn't make either last year and am fervently hopeful that I could do not just one this coming year...
RRE = Riffraff East (Tennessee)
RRW = Riffraff West (Colorado? hahahaha)
__________________ Brendan
1999 F250 CC SB 4x4 7.3 PSD named "Nyx"
BTS VB;6637;A-pillar (pyro, boost, trans temp);XM radio;Alpine CDA-9831 w/RCA inputs;Leveling kit;Adrenaline HPOP;UnderCover tonneau cover;05 headlights
I'm sorry for not reasearching first, but the 6liter ic does not bolt in??
It did lok like the upper mounting tabs were different but the lower saddle mount looked the same. I know I'll need new ic couplers (I'll get my brother to buy all 6 new for his truck) but how does the ic mount in there. Any pics of the install I can ok at.
I'm just trying to get the info so I can get the 6liter ic into his truck quickly without his wife knowing, lol. Then I get his old one so I can modify it for my truck.
You have to move the stock trans cooler lines (if you can). I didn't think I could move mine safely, but some have managed to put the 6.0 I/C in with the stock cooler. I put the 6.0 trans cooler in first to fix that issue. That should be the only complicating factor. Other than that, all the mounting tabs and such are in the correct places and it drops in place. Other than the boot issue which you already know about, that is all there is to it. Here are some pics of my install -- not too much to see, but that's it... 6.0 I/C & Trans Cooler pictures from random pictures photos on webshots
I'm sorry for not reasearching first, but the 6liter ic does not bolt in??
It did lok like the upper mounting tabs were different but the lower saddle mount looked the same. I know I'll need new ic couplers (I'll get my brother to buy all 6 new for his truck) but how does the ic mount in there. Any pics of the install I can ok at.
I'm just trying to get the info so I can get the 6liter ic into his truck quickly without his wife knowing, lol. Then I get his old one so I can modify it for my truck.
I am sorry I cant do anything quickly when it comes to my truck except to burn fuel and tires .I'll let you know later after I get trans and oil cooler hooked back up .
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Jeff 
