Bell Housing - 351W (5.8)

E30tdf · #1 (**permalink**) 10-30-2009, 12:59 PM

I have read a lot of data on imbalance and clutch size etc. I wanted the larger clutch, so I purchased a 28 oz imbalance 164 teeth (approx 14.25 dia) steel flywheel. All the bell housings I have are the smaller 157 size.

When I go Junk Yarding, are the F-series trucks with the 351W engine all going to have the larger bellhousing or not? I need one that will mate to a BW T-19 4 speed. Are Full Size Broncos likely to be 164 size as well?

Thanks for your help

Kemicalburns · #2 (**permalink**) 10-30-2009, 02:50 PM

u may have to look for a np435 small block bell housing if that will work on the T19 not sure.

Beanscoot · #3 (**permalink**) 10-31-2009, 12:08 AM

You might also find the bellhousing behind 302s and 300s, they also used the 11" clutch in some trucks.