disc brake part numbers

[rob8210]

I have a 1979 F250 4x4 with double piston brake calipers. I just had a disc brake wedge fall out fortunately iI had one kicking around. Would anyone have the Ford part numbers for the wedge and anti-rattle spring? It seems Ford has gotten rid of all the catalogues before 1980. Thanks

[Greyman]

I have a 78 f250 with the same brakes and just got a parts kit at local store, comes with spring and wedge.

[bigdan1979f-250]

My 79 f250 did the same thing. The brand is Raybestos or something like that. Does anyone know where to find an aftermarket part for this setup? I need the arm that bolts to the spindle that holds the caliper in place. Thanks

[Greyman]

Ditto for me, I need the drivers bracket and dust shield, before I owned this truck the wheel must have come off on the road and the bottom of the bracket got ground down and broke off the retaining bolt for the caliper.

[75F350]

Hit your local salvage yards. The last time I needed a caliper bracket for a dana 44 I picked up a pair for about 22 dollars.
I even think that some dealers still have these in stock. I remember buying one a few years back and was suprised that they stocked it.

[Greyman]

Thanks, I've been calling all the local yards looking for one. Mine is a 60 front end so they're a little harder to find.

[NumberDummy]

Originally Posted by Greyman

Thanks, I've been calling all the local yards looking for one.

Mine is a DANA 60 front end so they're a little harder to find.

D8TZ2B292A .. Right Caliper Bracket / Obsolete

D8TZ2B293A .. Left Caliper Bracket / Obsolete

No Ford Dealer or obsolete parts vendor has any.
------------------------------------------------
E5TZ2K004A .. Right Shield / Obsolete

E5TZ2K004A replaced D8TZ2K004A, D7TZ2K004A, D6TZ2K004B.

E5TZ2K005A .. Left Shield / Obsolete

E5TZ2K005A replaced D8TZ2K005A, D7TZ2K005A, D6TZ2K005C.

No Ford Dealer or obsolete parts vendor has any of these part numbers.

[Greyman]

thanks for looking around #'s.