i need top find an f-350 frotn transfer case output yoke for my truck. i have the double cardon joint but i need the yoke from a 350 to complete the switch. anybody got one?

 

I got a knuckle sandwitch you can have.

 

You said you had the yoke! I have tried to find one online to no avail. You'll have a PM shortly.

 

i thought i did but it was another 250 yoke.....lol. now i am stuck with a modded driveshaft and no 4x4!!!! i got your pm but the guy hasnt got any progress

 

i am still in dire need of this yoke!!!! has anyone got one????????

 

get ahold of obswiz at powerstrokenation or his site is ctperformance.com there supposed to be getting some made. im needin one too

 

i am in contact with jesse at high angle driveline. i have to pull my yoke off and get a spline count. he says they have everything there i need but there are 3 different spline count possibilitese.......... i think it may get expensive...they said i would be converting to a flange style instead of a yoke, so that would also mean i need a new shaft......ugh!

 

theres a driveline shop in northern california that can do it too but blanking on name. cary is supposed to have the yokes or have them really soon did ya call him?

775-835-3569 8am to 5pm
Pacific time. M-Sat

 

did not call him, too late tonight, i will call tomarrow. high angle drivleing isnt goign to work for me, have to buy their yoke and driveshaft- about 800-1000 bucks in all. i was working on the free dollar budget.

 

still striking out and in real need of 4wd. has anyone tried to convert to a superduty flange? i cant find any info on if the spline count and yokes are interchangable from our t-case to a superduty case.

 

Joe you could try here. Might be worth a shot.

 

no good, and i called obswiz, he doesnt have any yet, could be next week could be a month. he doesnt know when he is going to have them made. its on his machine shop

 

that sucks i guess he just hasnt gotten enough to get an order run. hmm i dunno.... you got the bw4403 i take it the sd is the np271 (well at least the 00 is)

 

np273 sorry

 

mine is a 4407, not sure what is in the superduty's. he has an order in to a machine shop but they are not done, the shop has to buy new equipment to do them.

i need to find out what the spline count is on the sd's and if the flange will fit the 4407. if it does i will run the sd flange and shaft with a conversion joint from 3310 to 3330 joints