A large part of this ongoing build will be redoing stuff that was done in a rush the first time. Most of what you see ( or don't ) was done mostly just before a comp or a car show, so there is way more ratsnest then any one car should have. Now that I have time to go through it, I will post up whats being done like it should of the 1st time.
Don't ask for before pics, I didn't take any and I'm sure as hell ain't going to post any.
Today's project was to redo the A pillar gauges. It wasn't some much as an issue as it was for convenience and looks. The wire was scraps and all the connectors were crimped. Now it's pimp. Too bad the only time you will see it is here in pics :lol:
__________________
If the listening level is too loud, promptly inform the driver, so he may pull over, and let you out
I am using 3 HR-4125's with a total 16 channels of processing. I used 3 HF-1000.1's to mock up where I want them to go
Then you can't forget about the madness.
I haven't decided if I will use 2 Inferno 8.1's or 4 HF-2500.1's yet. Or maybe I will use more
Started off needing a false floor for the center console. The brain and 2 processors will be housed in there as well as the Sirius and the ipod control.
__________________
If the listening level is too loud, promptly inform the driver, so he may pull over, and let you out
He said I wasn't busy enough so he sent me more work to do
The UPS man hasn't been too happy with me lately. He asked if I had any packages coming in that wasn't over 50 lbs. I said just wait till my sub order comes in
Hard to tell in the pics, but the new black is the ****!
I will be out of town at a show this weekend, so it doesn't look like I will have a chance to roll any out. But when I do I'll be sure to post up plenty of pics of this pure sex product!
__________________
If the listening level is too loud, promptly inform the driver, so he may pull over, and let you out
I think that beer had something to do with the screen popping up
__________________
2004 Excursion V10
1979 MGB Limited
6 wild kids
People tell me I must have a lot of patience. I tell them I ran out of patience about 4 kids ago.
This is serious bittness must think everything through with a cold brew
I'll need a couple tomorrow when my new head unit gets here. Someone decided they wanted to try and get mine out of the ex and the only thing they did was succeed in destroying it.
Keep up the good work dude. I followed the first build and your wifes truck. Looks like your well on your way.
__________________
2004 Excursion V10
1979 MGB Limited
6 wild kids
People tell me I must have a lot of patience. I tell them I ran out of patience about 4 kids ago.
Got a few things done this week. I wasn't looking to do the battery swap up front, but once again Optima has let me down. I swear they are the worst batteries I have ever spent money on. When they die, they are dead.
The other great thing this week was that the memory camera took a dump so all the pics I had for y'all were for not. Oh well, here's a few of the after part.
I still have to fab up some tiedowns for the new batteries. I had to drop a good inch to get clearance. I think it's about as big as I can go up front
Oh yeah, I have some door panels in progress.
__________________
If the listening level is too loud, promptly inform the driver, so he may pull over, and let you out
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
) was done mostly just before a comp or a car show, so there is way more ratsnest then any one car should have. Now that I have time to go through it, I will post up whats being done like it should of the 1st time.
